Search results for query: *

Thanks GW! This was the current setting: ## LOGUNSEEN specifies whether incoming calls that did not cause alerting will be logged ## as missed calls (e.g., calls that are forwarded because the phone is busy). ## Value Operation ## 0 Unseen calls will not be logged (default) ## 1...

On 9611 and 9641s we have a question about call logs.. Calls that flow to voice mail do not appear in the missed call log or the delivered call log.. Is there a setting or fix for this?? Thanks ALL, Don Stewart

Anytime my friend. Anytime I actually have the time, that is!!! I know you know what I mean...

Down goes Frazier!!! Down goes Frazier!!! Sorry, Smokin Joe but that box has seen better days. The Power Supply could be all it is but to replace it and try it will be up to you and the budget. I don't know how much that is but I know it's cheaper than an entire unit. If the rest of the...

Boxer, It is hard to handle a budget or "wiring" issues on this forum. Do you have a Wire Vendor? I'm sure, if you do, they would be more than capable to remedy that issue. Running VOIP phones without POE switches is a pain. You would need to outfit every phone with an individual In-Line...

Kernal Panic - is where you are getting your denial of service. All together its pointing at either power supply, memory and or leaking capacitors on the mobo itself. How is the area in which this server is located? Dirty/Dusty, ventilated or not? Basically these errors point to an over...

Awesome!!! Good Job

Pedro, Look on page 2 of your CO Trunk Group. Check to see if you have an "Answer Supervision Timeout" Here's a screenshot of mine:] display trunk-group 9 Page 2 of 22 Group Type: co Trunk Type: ground-start TRUNK...

Thanks MontyZ!!! I had this at my last laptop and now I'm trying to load it again but my Google searches are just staring at me and not responding or giving me and IE error/page not found/diagnose problem. Much appreciated, Don

MontyZ, Do you have a good link to download WinSCP?

Correct Crash! Just don't copy run start or nvram init. A reboot will restore previous config prior to the changes.

From what I was reading it is user ready. Also, if the person with the HA just needs it to be louder, there is another handset that has an additional volume control/thumb control from 1-10 that can be retro fitted or switched out with the traditional handset. I have been looking for you to see...

http://www.aplustele.com/brochure/lb0839.pdf Avaya 2500 is Hearing-Aid Compatible    

This should get you thru the G700: login Password NVRAM INIT Type configure The prompt appears as P330-1(configure)#. set interface inband <vlan> <ip_address> <netmask> Type reset and press Enter to reset the stack show interface inband to verify that the Avaya P330 stack has the correct...

Try running these commands on the Gateway itself set reset-times primary-search 2 set reset-times total-search 10 set reset-times transition-point 2

Perfect!! Thanks ALL

Capture a "list trace" on the internal call to the operator to see if that sheds some light on your situation.

Here is what I found in my settings file. Do I now just simply remove the ## to enable SET LOGUNSEEN 1? Does that sound correct to you Matt? > Solution: > If the client wishes to log all calls as done prior to 96XX 3.0, the option on the settings file for LOGUNSEEN needs to be changed to1...

I am about to deply about 300 of the 96XX's. We have a couple that we are using to have made our choice of which ones to go with system wide. I am now having an issue with no call log if called and it goes to VM. Not even in the Missed Calls. We have no issue with the 46xx's but now with a...

Fataldata, You might be able to create a Cron Job but according to Avaya CMSADM is a manual process. I'm sure someone here has figured out the Cron settings and has had success. I myslelf have not.