Search results for query: *

I think slash/50 is right : DMG licences do not apply for external database

Hello Ip phones 4225 are IEEE 802.3af compliant, meaning they can be remotely powered through ethernet interface. IEEE 802.3af is divided into 2 parts : power in data pairs and power in spare pairs. Does phone 4225 support both powering system ? Regards

Hello Can someone help me with this issue : BC 11, duplicated group switch +/- Every ten minutes, an error appears in gjlop : B-POS GS-M S ALARM-TYPE ALARMDATA TIME ----- ---- - ---------- --------- ---- 3-0-00...

ps: OS is hp 11i

Hello Somebody can help me ? I would like to start CDE or another GUI through X terminal. I get the # prompt, but I do not find how to start the Gui interface Thanks Regards Rorni

Hello guys, Recently, I get a problem to have a valid safety backup using MDDT : When starting the backup, data of lim are correctly transfered, but the ftp stops in P directory, and on different files. At this time, a popup screen appears on MDDT : Error 12031. My pc and SAM toolbox are...

les than 11, so beter to start an full new system. Alapi : when you add a lim on line, you must stop call logging, traffic recording and after the lim is added, you have te recreate those. but you must also set the number plan in you new lim. for this, use command ladci to copy data from a lim...

How many lims are already installed ? If less than 11, you beter to start a new system. Else : - Make an inl - Connect your lim - load the LDT with Pu like lim 11 - copy common data - start the lim and SFCEI - Backup full description in alex : "ADDITION OF LIM " Hope this help /rorni

Beter to set on A a MDN of B. Press MDN B button and activate follow-me to C. Hope this help /rorni

Hi, Check with command "gjlsp:print=faulty". You should send it twice : first printout will erase the log. The second printout will give you active errors. Post the second printout here for further analyse Regards /rorni

hi Lalrl, ITNUI is not mandatory. Acctyp is enough for : - Outgoing calls from S0 - Incoming calls to S0 with bearer data set - Incoming voice call is you program and set active a RDC key on dts (will route all voice calls from DTS to S0). You need only to program ITNUI if you want to give...

...the I max of the rectifier unit (normally written on the unit) : After a power failure, the power unit will deliver his max current to charge batteries. Take into account an efficiency of +/- 80 % for rectifier unit. VA=55V * 15 A (example) * .80 = +/- 650 VA max per lim Hope this help /rorni

Hi If you cannot use the good tip of Fidde (MD >BC10, or fax ddi range too large) , you may consider this alternative : Set your ddi route sel D1 on 4 or 6. This will prevent rerouting on congestion ( this state should occur when fax server is down)but allowing rerouting on no answer or busy...

You are wrong : your tip is working perfectly ! Thanks for your help /rorni

Hello, Can somebody explain to me how to set the contrast of the screen for the new IP phones ? Thanks /rorni

An other way, if all guys are in the same room is to add a phone ext 61111 (wall mounted),with diversion to voice mail and to programm a pickup group with all phones.

Could someone tell me what is a "Explicit Call Transfer " /rorni

Syar in " Alex \application system, France\General\Market unique Functions" /rorni

Hi Chris Multiple FM won't work BUT If A has a div on no answer to B, B can activate a FM on A to B (*21*A*B#) and then activate a FM of A to C : *21*A*C# Also a usefull tip : If A is in FM to A, a B phone may activate a FM from A to B (*21*a*B), and B is allow to forward the call as...

Hi A lot of thing has changed with the new "Personal number" facility. Anyway : Q1 : if A is diverted to B and B is follow-me (*21*C#) to C, calls to A extensions will be forwarded to C. BUT is B is diverted to C, calls will stay on A. I advise you to tell to secretary to activate a FM when...