Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DBC 425 : How to set screen contrast ? 1
- Thread starter rorni
- Start date
-
1
- #2
Hi,
The settings for display contrast is not yet available through the menu, but I received some info some time ago about how to do it within VxWorks through the telnet interface on the terminal.
For me, it did not work, but You could try:
EQUTESTREQ 157, "<level>"
<level> 0-7, 0=min, 7=max, 3= default
Best regards
Paal
The settings for display contrast is not yet available through the menu, but I received some info some time ago about how to do it within VxWorks through the telnet interface on the terminal.
For me, it did not work, but You could try:
EQUTESTREQ 157, "<level>"
<level> 0-7, 0=min, 7=max, 3= default
Best regards
Paal
- Thread starter
- #3
FiveSwords
Instructor
I tested it too. On a DBC413 R6J it doesn't work at all, but on a DBC425 R2A it works ok!
Great tip! Have you got any more of those? (Like other commands or parameters you can set?)
Great tip! Have you got any more of those? (Like other commands or parameters you can set?)
- Status
Similar threads
- Question