how to install S0-Adapter

[lalrl]

Is it enough to inititalize dig. phone with parameter acctyp=0 or do I really need ITNUI and extranumber for SO-Device connected to S0-Adapter?

 

[MATOVTZ]

Try like this.
/*------------------------------*/
KSEXIIR=1938,EQU=4-1-70-1,CAT=2,ITYPE=19,ACCTYP=1,ADC=00000000011;
KSEXIIR=1890,EQU=4-1-70-2,CAT=2,ITYPE=19,ACCTYP=1,ADC=00000000011;
EXCCS:CAT=60,SERV=020210000,TRAF=01151515,CDIV=001090000,ROC=000001;
ITNUIIR=2113,EQU=4-1-70-1,CAT=60;
ITNUIIR=2114,EQU=4-1-70-2,CAT=60;
/*-----------------------------*/
BR

 

[rorni]

hi Lalrl,

ITNUI is not mandatory.

Acctyp is enough for :
- Outgoing calls from S0
- Incoming calls to S0 with bearer data set
- Incoming voice call is you program and set active a RDC key on dts (will route all voice calls from DTS to S0).


You need only to program ITNUI if you want to give extra DDI number to S0.

Regards
/rorni

 

[lalrl]

It works fine now - also with rdc.