Search results for query: *

Also in the Options of the 1140 IP Phone you will need to set the off hook defalt path to headset. Don6531

If a COT route don't work try a PAG route. Don6531

You will need to program a COT route in ld 16 and then program a COT trunk in ld 14. Once this is completed you then cross connect the second pair of the trunk TN to the relay. Each trunk TN is two pair and the second pair of each trunk TN is a contact closer. Then program an Hot D key with...

Out the DCH and re-build it and enter passes RLS. Don6531

Did you configur you not ready codes on AACC under the Confiuration Server Name Activity Ciodes? Don6531

We are way past that. We have looked at all the logs we can. Its in Avaya design now. I'm looking for others that might be having the same issue and once there is a fix I will post the solution. Don6531

Has anyone had this happen? Don6531

Yes, Sorry about that. Don6531

All, I have a good one here. I have 1 CS1000E 7.0 & 3 CS1000E 7.5 systems running all 3904 and resaving phantom ring on them. The phantom ring is random, sometimes 2 or 3 phones will start ringing. The phantom ring locks up, the red light lights all keys flash, no brake in the ringing, no...

I would check LD 86 and print your ESN block to see if TAGR = Yes in this case if the TGAR is 5 on the set and TAGR is 5 on the route the call will be blocked. If TAGR = no in the ESN block then the call should work.

Anyone have any information on clearing 3904 display with a phone with a X in it. The firmware download did not complet. Don6531

Look at Load 24 Type ESA. Don6531

KEY XX NUL enter. Don6531

Take a look at Algo. They have all kinds of items for IP sets. http://www.algosolutions.com/products/Audible-and-Visual-Alerting.html Don6531

What type CO. switch are you going to (MI2, DMS100, ESS5 ect...)? Don6531

Try the following changes and also from the Avaya to the Nortel you will need to send the 9 1XXX-XXX-XXXX or 9 XXX-XXXX to the Nortel to go off Net. DES AAAVAYAGW2DT1 TN 035 01 TYPE TIE CDEN SD CUST 0 TRK PRI PDCA 1 PCML MU NCOS 60 <------ I would check this I would change to 7 to...

Are your Qsig trunks are TIE? and you out bound trunks atr DID? If then you need to look at you net_data DITI needs to be YES for DID to TIE connections allowed. Don6531

You might check in LD 15 under NET_DATA to see if TRNX is set to NO. If it is set to No change it to yes and test. Don6531

Is this T1 a clock source and also is this T1 on a TMDI card? Don6531

Has anyone come across a good document that explains the routing configuration of Avaya Aura Session Manager to a CS1000?