Recent content by stturner

We converted our last Nortel phone to Cisco today. I just wanted to thank everyone here that helpded me out over the last few years with suggestions and help with the many problems and/or questions I had. This place was always my first stop before any other tech support for the Nortel system...

BIOMEDCOMM - I have not had any luck finding wired earbuds that work. whykap - the link you posted does not work for me. It comes up with a plantronics page that says to narrow my search. I have tried the Plantronics site before and end up going in circles trying to find anything on that...

We are looking for a wired headset/ear buds for the 7925g phones, something similar to what you use for a cell phone. I know they have bluetooth, but we are a manufacturing facility and battery life of the bluetooth is a problem. Cisco website says "The Cisco Unified Wireless IP Phones support...

I second the Algo Auxbox that nessman suggested. Works great attached to a Blue strobe light.

Thanks, maybe I am just over thinking this one and it really is that simple.

We are in the process of migrating from Nortel to Cisco. I need to OUT my 2250 and redirect calls to the operator 0 and our main number 5300 to the new Cisco Console. I have already migrated about 1/3 of the desk phones to Cisco by removing them and creating route in LD87 to Cisco. The new...

Happy New Year to everyone here. As stated by others, this is a great place for help and I appreciate all the help I have recieved over the years.

A phantom line would be easier.

Thanks dj4020, that is what I was afraid of. Can I program the ext on Phantom 500 lines or does it have to be a true 500 TN.

I need to have 3 DIDs that are currently on 3 different phones moved to a single phone. I will be setting them up on a M2616 so that I have enough buttons to have the MWK on a key for each of there voicemail boxes. My question: Do I need to do anything special to have the DID roll to the...

Thanks for all the help/suggestions. I have been testing using a 7 digit number for line 2. Key 0 = 1234 Key 1 = 2991234 So far the people using it have not had any complaints and it works great. Just wanted to thank everyone for the help.

Thanks again, I am testing 2995XXX on a few phones and so far it seems to be working as expected. One last question. Is there a way with command line or OTM to change the label from 2995XXX to Line 2 or would I have to do that on every phone? I am using M3903 and 1120E IP phones.

Thanks for all the replies and information, it really is a big help getting different examples and ideas. If we were to do the 5 or 7 digit roll over is there anything on the system that needs to be changed? One of the first posts mentioned pkg dnxp 150, how can I determine look for that.

First a little back history... Before I started working here and also before we grew in employee size we had 2 blocks of DID numbers, the 5XXX and 7XXX range. All our phones were programmed such that line 1 was 5XXX and line 2 was 3XXX (where XXX is the same number) Now we need to free up the...

I'll test this tomorrow and let you know. I appreciate the help.