Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by relo101

  1. relo101

    Remote call forward main extension

    Thank you for the info. That sounds like a good solution. I will try to set it up. I can have the AA message changed to include (for the answering service dial xxxx)and forward that station. Thanks again.
  2. relo101

    Remote call forward main extension

    I forgot to mention It's a Magix. I think version 4
  3. relo101

    Remote call forward main extension

    My customer wants to remote call forward her extension to an answering service. The main telephone number comes in on a Pri and is routed to her extension. They have night service set up to go to an Audix auto attendant from which the calling party can dial extensions. If she remote call...
  4. relo101

    Magix 2.0 V9 2nd carrier

    Ok guys it's solved. Tommy yours was the closest. Your comments prompted a stare and compare and I found the problem in the Night service area. And I was always working after hours. The switch was set up for no out calls except those on the excluded list which had all the stations on the...
  5. relo101

    Magix 2.0 V9 2nd carrier

    That was just for a test to see if I could get to the trunks. It didn't work either. When I dialed 70 I got DT, but couldn't complete either. Probaly because 70 is pri and can't be accessed directly. An out code bypasses the D-channel signalling? Keep in mind existing stations work fine. Thanks...
  6. relo101

    Magix 2.0 V9 2nd carrier

    Thanks for the input. This is a toughie. It just added 4 more ports at the end. I forget the 8xx numbers. The pri seems to be working as normal for stations on the other station cards in cabinet 1 (with my new card in 7). Those are a 412 in slot 2 and an 024 in slot 3. I'm wondering about a back...
  7. relo101

    Magix 2.0 V9 2nd carrier

    I recently installed a 412 card in slot 7. After the initial power up all of the stations on the new card can call station to station, but when I dial 9 the call is denied. I get DT on 9 but when the first digit is disled is when the call is waved off. The existing stations work well and are...
  8. relo101

    Adding a trunk

    Roger that. My outbound didn't work because I had the route (RDB) set for incoming only. When I changed it to IAO it worked fine. Thank you ever so much for the help. I'm good to go. You're cool.
  9. relo101

    Adding a trunk

    It worked. TAnselm, Thanks, the private line is just what I was looking for. The outside line when dialed now rings on key 14 on a 2616. And for worldwidedialtone the forward diconnects work fine with the default settings. I did use route 30. Now can I MAP that key back to that trunk so I...
  10. relo101

    Adding a trunk

    Thanks for the info. That'll get me going
  11. relo101

    Adding a trunk

    Option 11c I've got a new line (loop start trunk) from the phone company and want to put it on a key on an existing 2616. I've installed a new universal trunk card and have built 8 cot trunks. From there I'm lost. Anyone have a how for this?
  12. relo101

    tn798

    Thanks Jimbo. After I posted it I thought "This is an upgrade". And I just had to find a card with the right version instead of changing it. It's fixed, and thanks for your input.
  13. relo101

    tn798

    After replacing a tn798 the resident memory is g3v7,xxxx and my old card and flash card are g3v8xxxx. how can I get my old info into resident memory on the new card? I'm on a Prologix. The only login that works is not my old one and my old translations are not there. I did a reset sys 4 after...
  14. relo101

    V8.0 to 9.0

    Found it. The guy that wrote the customized reports Removed the the customization on the reports and added back his special fields to the basic 9.0 report templates and all works well (I can now print the modified reports. Another issue I've had with the update is on the first login for the...
  15. relo101

    V8.0 to 9.0

    After updating I can't print a sales report. The error is bad calculation of the sitemnumber. I have updated dictionary from the 8.0 and see many errors concerning unidentified places. All of the modified reports are failing. Anyone else have this? When intalling features I selected only...

Part and Inventory Search

Back
Top