Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Adding a trunk
- Thread starter relo101
- Start date
acewarlock
Technical User
Why would you build 8 COT trunks if you only got 1 new trunk?
As PERRYPJ said, you need to build a new RDB and make it a AUTO TERM Route then bulid a new trunk that ATDN xxxx to the key you want.
What ever DN you want on that Key is what you ATDN to.
As PERRYPJ said, you need to build a new RDB and make it a AUTO TERM Route then bulid a new trunk that ATDN xxxx to the key you want.
What ever DN you want on that Key is what you ATDN to.
- Thread starter
- #4
I don't think he wants an autoterm trunk... sound to me like he wants a Private Line.
In this case build a new route (usually 30)
and answer "YES" to PRIV
Then build COT trunk in route 30 with PRDN number.
The PRDN number is the number that you will add to the 2616 phone as in the following:
KEY xx PVR YYYY (XX being your key number, YYYY your PRDN)
In this case build a new route (usually 30)
and answer "YES" to PRIV
Then build COT trunk in route 30 with PRDN number.
The PRDN number is the number that you will add to the 2616 phone as in the following:
KEY xx PVR YYYY (XX being your key number, YYYY your PRDN)
Take a look at MerAssistant. I am a complete noob at switch management. I do have to call a technician for most things in my office. I often recommend to my customers Nortel compatible software. I found MerAssistant from RSI to be really cool (
I can make most MACs myself. There is also Phoneware and OTM but at a higher price point.
S16
I can make most MACs myself. There is also Phoneware and OTM but at a higher price point.
S16
worldwidedialtone
Technical User
TAnselm is correct, you want a private line. Since you have loop start trunks be sure to set up your BTID and test so that your trunk will dissconnect in a timely manner. Loop starts are fine as long as you can get them to disconnect and you may have to set your RGV timer in your RDB down to 256 so it will catch all calls.
MIKE
MIKE
- Thread starter
- #8
It worked.
TAnselm, Thanks, the private line is just what I was looking for.
The outside line when dialed now rings on key 14 on a 2616. And for worldwidedialtone the forward diconnects work fine with the default settings.
I did use route 30.
Now can I MAP that key back to that trunk so I can also use it for an outbound call? Or do I have to build a SPN in BARS to get to it? My goal is to have this 2616 be the only one with access.
Thanks for the help.
TAnselm, Thanks, the private line is just what I was looking for.
The outside line when dialed now rings on key 14 on a 2616. And for worldwidedialtone the forward diconnects work fine with the default settings.
I did use route 30.
Now can I MAP that key back to that trunk so I can also use it for an outbound call? Or do I have to build a SPN in BARS to get to it? My goal is to have this 2616 be the only one with access.
Thanks for the help.
The purpose of doing it that way is that he has instant access to the trunk. Press the Key 14 and he is already out on the trunk. You are already done.
Note: you can if you want add that PVR to more than one phone though if added to too many you kind of defeat the purpose. You can also add it to a phone as a PVN (Private line Non-Ringing).
Just remember if you need any other Private Lines to just build new COTS in Route 30.
Note: you can if you want add that PVR to more than one phone though if added to too many you kind of defeat the purpose. You can also add it to a phone as a PVN (Private line Non-Ringing).
Just remember if you need any other Private Lines to just build new COTS in Route 30.
- Thread starter
- #10
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question