Recent content by Mitel100

Mitel sell the streamline unit which comes in two variants (a 24 or a 48 port) unit. the streamline units powers IP phones over Cat3 / CW1308. __________________________ There is no 'I' in 'Team' __________________________

I am sure to resolve this problem, you need to create a folder on the root of the c drive called fakepath. place the backup in this folder and perform the restore using this file in the new folder. __________________________ There is no 'I' in 'Team' __________________________

Option 125 only supports 1 TFTP address. This is why you are only seeing one within the phone debug. __________________________ There is no 'I' in 'Team' __________________________

If you have a SIP trunk provider that support KPML, then MBG is not required. MBG is only required if the provider does not support it. __________________________ There is no 'I' in 'Team' __________________________

there is no upgrade path from IQ to VWM. If you want to have VWM, then all configuration will have to be from scratch. __________________________ There is no 'I' in 'Team' __________________________

Is the Paging unit connected to an external PA system? __________________________ There is no 'I' in 'Team' __________________________

Release 5 does have multiple time zone support and should be release around Sept 2011. __________________________ There is no 'I' in 'Team' __________________________

vMCD, ISS or MiCD will use use compression licenses for the use of media resources. By default MOH, embedded conferencing and other media will use G.711, for these to use G.729 codec compression licenses are required. TrentGreenawalt, If you put compression channels on your MCD boxes, this...

You need to download it off Mitel on-line, you will also need to download some of the fix packs as well. __________________________ There is no 'I' in 'Team' __________________________

Windows 7 64 bit support came out in Rel 5.8. __________________________ There is no 'I' in 'Team' __________________________

On the local networks, the gateway address will be that of the subnet the MAS applications resides on. __________________________ There is no 'I' in 'Team' __________________________

There isn't one, the password is set during the installation of the MSL. __________________________ There is no 'I' in 'Team' __________________________

I have been using 4.0 for a while now and I have to say that Mitel have made some improvments to the app. Looks very professional and the video is good quality. __________________________ There is no 'I' in 'Team' __________________________

I have seen this many times and this problem occurs when you connect the PC / Laptop with a Gige interface to the L2 port at the back of the phone. But this problem only happens with a combination of certain types of older Cisco / HP switch's and older Mitel phones. The cheaper option would...

Yep, I have one installed and working, works great, but a little expensive. The hardware you have is the UniPhyer which connects onto the LAN along with the Amphenol cable connecting to the CW1308 frame. Then on the far end you have a PhyAdapter which has two connections, an RJ11 which connects...