IP Paging

[skinnypuppy56]

I have setup a few 5485 paging units and notice that ringback will come through speaker then the announcement - can i get around this?

MCD 3300
extension 20170
speedcall 0993
number *3720170

I tied with a # and no luck

Thanks.

 

[Mitel100]

Is the Paging unit connected to an external PA system?

__________________________

There is no 'I' in 'Team'
__________________________

 

[skinnypuppy56]

yes we connect to a bogen amplifier in most cases and external speakers.

 

[roundyoback]

Try following these steps:


Program Group Page with the IP Paging Unit (This programming procedure will ensure that a ring burst does not occur prior to the speech broadcast):

Multiline IP Sets form
Program the IP Paging Unit as "5010 IP".
Program the MAC address.

Page Groups form
Complete all required fields.


Class of Service Options form
Set the Group Page Accept field to "Yes" for the IP Paging Unit.
Ensure that each telephone in the paging group has the Group Page Allow field set to "Yes".

Feature Access Codes form (optional)
Assign a Direct Page feature access code.

Multiline Set Keys form (optional)
Program a Paging key.

Interconnect Restriction Table
Ensure that the station is not restricted from Paging.

***************************************************************
make sure you put the 5845 extension number in the page group
***************************************************************
To make group page:

To initiate a Group Page:

Lift the handset.

Dial the Direct Page feature access code.
-or-
Press Direct Page or the key programmed as Direct Page.

Do one of the following:

To page your prime page group, press #.

To page a specific page group, dial the page group directory number.