Recent content by marathondude

Tested with a spare DID. I made a call from the site using another extension, that call did go through to the cell phone. When I made a call from another cell phone to the forwarded extension, they failed. It has to be the caller id issue.

Great idea. I have a spare DID. I'll do that and report back. Thanks! MD

Curlycord, Thanks for the reply. During the day the phones are answered by the receptionist or a rollover hunt group, they don't roll to the AA. I did change the control set (see the post above yours) and it did not help. MD

There is no target line assigned to this extension. The issue is on the main DID when it is set to go to the AA on night service. I did remove ext 221 as the control set for the extension with this issue, did not help. I think Cook might be on the right track, but I don't know the work around.

I have a BCM50r5 with a PRI. One extension is remote call forwarded to a cell phone, which works fine during the day. When the manual Night Service button is pushed, calls are answered by the Auto-Attendant. If the forwarded extension is then dialed by the caller, the call will drop. Turn off...

No, you can do a dongle swap through your distributor. It is a simple process.

Yes create a shortcode for outgoing call barred on (and off), then dial that shortcode at the extension.

Google 'avaya bcm sip ip office' and you'll find the interop guide

Place a Z in front of all of the hunt group names, at least that way they'll be at the end of the scroll.

Don't forget to check "Allow Trunk to Trunk Connect" on your lines

You're welcome. Thanks for the star!

Feature should be Auto Attendant, not dial

http://www.atelephonesystem.com/Handsets_IP_Office_1400_1600_Amplified.htm

Do you have an essential license?

In manager, user setup, button programming. Check the box that says "modify ALS" Just like a Partner "Auto Line Select".