How to Connect Avaya IPO with to BCM50 1

[PepeHillo]

I need to know technical details of the configuration between BCM50 and ipooffice

 

[marathondude]

Google 'avaya bcm sip ip office' and you'll find the interop guide

 

[phoneguy610]

just doing this today but to a 450

you need to configure a sip trunk to connect the two

the guide is very helpful

http://downloads.avaya.com/css/P8/documents/100164746

 

[PepeHillo]

have another problem I have in the BCM50 digital trunk and want to use it in the IPO but I only accept 4 digit trunk sip some idea

 

[biv343]

Increase the length of public received digits in the BCM from 4 to 7 or 10. The max received length determines how many digits the BCM can receive on a public target line. If you're receiving 4 from the telco, you can set the max received to 10 and it will still work. If you're receiving 7 and the max length is set to 4, it won't work.

 

[PepeHillo]

The bcm50 received more the 4 digits becouse i had another bcm50 using digital trunk of them, but the ipo dont send more than 4 digits

 

[biv343]

You can adjust the programming in the IPO to prepend digits set to the BCM via the shortcodes you're using to dial the BCM.