Recent content by JLLeBoeuf

This is a client that is off site, i have remote access to their server, so i wouldn't be able to see the temperature without going there on a daily basis...unless of course i asked the customer on a daily basis to give me the temp information. It's an HP Server.fairly new ML350 G4. Also, I...

What about compressed files? do you have a lot of already compressed files? What can the tape hold for compressed media?

I've finally contacted HP about this, now it's a big project. Apparently the Tape drive is getting to hot, which then gives out a hardware error. There's a few things to check when you get this error: 1) Temperature of the server room 2) Location of server (on the floor, against a wall,etc) 3)...

Maybe the tapes are old?? How long has it been since you've used new tapes? Take a look in the system event log...does it say anything about a Bad Block?

Hi guys, I have the following error appearing every minute or less. Backup Exec 11d for Windows Servers Date: 8/28/07 source: Storage Agents Category (18) Type: Warning Event ID: 4611 Component: SAS Agent Error: Could not read the registry subkey: "CompaqStorage\SCSI\SASTapeDrv". Cause: This...

Did you recently change the administrative password to that log on account? If not, is the accoutn a restricted logon account?

Also, I've disabled allowed direct media path. No change. HELP AGAIN!!

I have a Small community network with 6 systems, 4 are running 4.0.7 and the other 2 are running 3.2.57, The main site hosts centralized voicemail, all sites are tied together by frame relay. The data links are good, but inter-site calls are failing after a couple hours. HELP!!!!!

Check to see if there is anything unusual in the event viewer?

I have a customer with B.U.E 8.6 . The backup keeps failing with the following error: RSM Database cannot be backed up because of the Removable storage service is not running. A Flat file backup of the appropriate files will be performed. In the Event Viewer: A Service specific error has...

Ok, Let me show you what i found, a fellow employee of mine an i were working on it last night. Here's what we found: In VM Pro under short codes, create a start point heading towards "get mail" in specific, point that to a specific extenion. in Manager, create 2 short codes, one that says: SC...

I have already tried that, because of the Voicemail collect button it automatically defaults to the original phone (i.e. if i'm at extenion 4100 and i want to get the voicemail of extension 4200 ...i dial that short code, i get the voicemail of 4100). all because of the voicemail collect option...

But i'm looking to program a button on a 5420 phone that sort of works like a Voicemail Collect (VMCOL) button but for a specific extenion, i want the same capabilities of a normal Voicemail collect button....

Just a thought, if you run an inventory on the tapes, sometimes they fall into the Scratch media field. You will have to move it to the Media set field.

I need to find a way to program a Voicemail collect button that will allow me to access another extensions voicemail. Any ideas? i've tried a lot and so far nothing seems to work right.suggestions are greatly appriciated.