NEC DT700 STANDARD SIP FIRMWARE 14

[axlicio]

Good afternoon.

I have some NEC DT700 equipment and according to what I was reading, the firmware could be changed so that they are compatible with Asterisk, can someone pass me the firmware and the NEC Ip programming tool? Thank you very much

 

[Davide G.]

Hello everyone,
Fortunately I found this interesting discussion as I also need the SIP-STD firmware for Nec DT800 series firmware ver. 4.0.1.0 and also the NEC-SIP version to possibly return to the previous state.

You can send to : jiddebohopra-9587@yopmail.com

Thank you

Davide

 

[Faraz Fennix]

Hello @belevedere

I've got it. Greatly appreciated.. Thanks Huge help

 

[dll2003]

Hello Belevedere!
Recently I had a similar story, like many in this topic.
We have many NEC DT700 (ITL-6DE-1P) phones that now need to be connected to Asterisk.
I ask you to send me a link to the firmware of SIP protocol for these phones to my address ...
Very thanks for help.

 

[Shaun E]

Would love to get a copy of the Standard SIP firmware if possible (and the NEC phone load to restore if it's a different file) as while I do have a SV9100 running at home I'd like to see what the functionality is like with standard SIP.

My email is (removed)

Thanks in advance!

Thanks for sending that through! I believe the firmware is the same for the phones (but definitely isn't for the CPUs)

 

[belevedere]

dll2003 check your email
Shaun E I sent you the link for both files. They are for use in the US. I do not know about the AU systems.

 

[Shaun E]

I don't suppose you have the standard SIP for the DT830 series too belvedere? Looks like that file doesn't have it (should start with itz)

If you do that'd be most appreciated!

 

[dll2003]

>> dll2003 check your email
Hi, belevedere!
Thanks for the help, I will try it in the near future.

 

[Davide G.]

Good morning,
I too would need the SIP Standard firmware to register a series of terminals on the Alcatel OmniPCX OXO PBX.
My email is: davide.galoforo@virgilio.it

Thanks for your help.

 

[belevedere]

Shaun E, provide an email address for the DT 830 NEC SIP files

 

[Shaun E]

Thanks belevedere - se@se.au is my email.

Was after standard SIP for the DT830, as the NEC SIP you've shared has the DT830 already!

 

[Davide G.]

Good morning,
Thanks so much for sharing the files.
For the switch from the SIP-NEC version to the SIP-STD version which file should I have the phone import?

Thank you.

 

[belevedere]

The file labeled for STD SIP

 

[Faraz Fennix]

Hi Belevedere

what is the .tgz file for NEC-SIP firmware?

Thank You

 

[ddeakes]

Hello

Could anyone kindly provide the SIP-STD Firmware for a DT800 handset?

My email is: damien@hallcrossacademy.co.uk

Many thanks!

 

[belevedere]

Check your email.

 

[Faraz Fennix]

Hi Belevedere

How to change the STD_SIP to NEC-SIP in DT900 Phones ,I received the firmware from you and i have tried several methods but I failed from all the configuration , So could you kindly help me for this configuration

Thank You..

fennixfaraz@gmail.com

 

[belevedere]

Try using the phone manager. Check your email.

 

[Faraz Fennix]

Hello @belevedere

I've upgraded the firmware STD-SIP to NEC-SIP using the phone manager with pumpkin. @belevedere Greatly appreciated.. Thanks Huge help

 

[bobrovnikov]

Hi!
I need firmware for dt700 with pjsip support. Does such a thing even exist? Now I have firmware Nec Std SIP 2.3.90.19

 

[belevedere]

If you are looking for STD SIP, then provide an email address for a link to the files.