Avayatech713
IS-IT--Management
Has anyone figured out how to run the 96XX IP phones on IPO? Will they run on 4.2? Even if they aren't supported by Avaya - we would like to test them in our lab and use them in our office if there is any way possible.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IPO & 96XX Phones 3
- Thread starter Avayatech713
- Start date
- Status
H.323 will be in 5.1
ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
NoelOhashi
Programmer
Yay again... No need for SIP endpoint licenses then !!! Much better, right?
Yes indeed
But the sip version does work too though they are not supported on sip !
ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
But the sip version does work too though they are not supported on sip !
ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
NoelOhashi
Programmer
@ tlpeter
So, have you tested one 9650 IP phone as a SIP extension? Does it work smoothly? I already have one 9650 waiting to be attached to IPO 500
So, have you tested one 9650 IP phone as a SIP extension? Does it work smoothly? I already have one 9650 waiting to be attached to IPO 500
Kyle had it working on the ipo
I was very close but i did not test it anymore
ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
I was very close but i did not test it anymore
ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
I got the 9620 and 30 to work. Don't have a 9650 to test.
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office
"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office
"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
amriddle01
Programmer
5.1 is when 96xx are planned to be supported but only in H323 mode
ACS - IP Office Implement
"What the Crocodile Hat....was that?
ACS - IP Office Implement
"What the Crocodile Hat....was that?
rmack22138
Technical User
Where can I download 1.0 software for the 96xx tel sets.
amriddle01
Programmer
lol, You've been after that since like March or something
ACS - IP Office Implement
"What the Crocodile Hat....was that?
ACS - IP Office Implement
"What the Crocodile Hat....was that?
What is the point in adding a set that isn't officially supported? You'll end up like my customer who purchased 6402 sets only to upgrade and find out that Avaya "fixed" the firmware so that they would not work since they were not supported.
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office
"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office
"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
HairySupportMonkey
Programmer
possibly you are trying to register the handset against a base extn already present on the system?
HairySupportMonkey
Programmer
you cant register a new phone against the same base extn, as the switch sees that already registered to a new device, regardless of whether or not its logged in or not.
try turning autocreate extn on and create a new base extn for the handset....
try turning autocreate extn on and create a new base extn for the handset....
I used the same extension for testing all my SIP devices. Maybe when you don't know any better ist just works. On the 9600 phones there is an option in the phone to tell it that it is NOT connecting to an Avaya PBX. In that this is treated as a 3rd party end point you should enable the "NOT AN AVAYA PBX" option whatever that is LOL.
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office
"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office
"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
NoelOhashi
Programmer
@Anyone
Does anyone have any info of when the release 5.1 will be available for download?
Does anyone have any info of when the release 5.1 will be available for download?
- Status
Similar threads