Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connection refused

Status
Not open for further replies.

Provax

Vendor
Feb 8, 2016
72
IR
Hello Everyone,
I want to connect to OS4K with ComWin directly, but the "Connection refused" error is appears. How I can solve this issue?

Thank you in advance
 
What is your IP address ?

Are you automatically sending in a username/password ?
 
Is the OS4K routable from your PC?
Is your PC's IP address in the allowed firewall rules on the OS4K?
 
Web Browse first that will add your ip-address into the firewall

The Kool Guy
 
Hi
PC IP Address: DHCP
Server IP Address: Static
Both of them are in one subnet.
SBCSU:
doesnt sent username and password automatically.
thepfy:
Yes
I dont know. How can do it?
Koolcom:
Thanks.

I add the IP address and it solved. But I change root password, How I can reset root password to hicom?
 
Set your IP address to be 192.0.2.100 / 255.255.255.0 no gateway
Plug into the Atlantic LAN or Service LAN port
 
Firewall rules are accessed via Assistant -> Base Administration -> Webmin
 
The problem was solved. But I change the root password, How I can reset root password to hicom or disable complexity check of rmx pass?
 
To assist others - how was the problem solved.


Note in CAPITALS...

To see the users: DIS-USER;
To change a password: PASSWD:USERNAME;


Further can be done in Start menu - HiPath 4000 Expert Access / Security Settings
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top