This option has been suggested. You will need an old computer to connect to your network. I would recommend caution if you are wanting to accessing it through unprotected cyberspace.
http://members.lycos.co.uk/ipcom/
We have been looking at an upgrade for our Opt11C. We can purchase SRS for 3 years for a very reasonable amount and Nortel is allowing us to spread the payments over the 3 years which would make it an operating expense. Just something you might try looking into or asking your vendor about.
Finally I have a working console. It comes up with an "MN" (minor alarm) but no numbrs or information on what it is. Also it has a loud and erratic popping. I have changed the handset, cord, and plug. Any suggestions?
p.s. Thank you for the help.
That brings up other questions about our installation. When I was trained on this system, I was told that the consoles had to be on one card and nothing else was to be put on the card with the consoles... The consoles have been on tn 0&1 and 2&3 as long as I have been there. As I recall, they...
I don't even have that much displayed. No lights or anything. I do have the two tn's plugged in. I don't believe this to be over 100'. I have tried the spare at this location, and it does not work there either.
I added a 2250 console to our opt 11c. When the console is plugged in, there is no response. Do I need to enable the ports somewhere? Is there anything odd about the wiring?
When you push it to sets, does it go to all sets or can you send it to a few to play with? I was just thinking it might be interesting to learn, but if it is a maint. nightmare it may not be something I would want to create for myself.
We have recently added some IP phones and some 3903's to our system and there is an application called "Corporate Directory". I have read some about it and am curious if anyone has it running on their system and what they think of it?
I have added the line to a hunt group... it still goes into voicemail after one ring. I have checked all the phones and I cannot find any that are forwarded to voicemail. Any other suggestions would be helpful.
I have replaced it with our spare console and the problem returns. That's what leads me to believe that it might be some buttons pushed. The other thing I was thinking about doing is turning the ports off and on to see if that would fix it... (that was more of a last resort). Is it possible...
We have a 2250 console with the lpk0 key staying on and lines rolling to the second line. It looks something like this:
>(lpk0)<>
On console 2 the lpk0 key is available when console 1 is busied out. What did they do and how do I fix it?
it appears on all the phones in the office and rings on most sets. It's intent is to be a back line to reach the office staff. I had thought of it being hard forwarded, but with making some changes, it switched vm boxes it was being sent to, adding to my confusion...
I am having difficulty with a BCM50e going straight to voicemail on line 064. The other three lines ring through the AA correctly, the fourth is not in the AA and until last week was ringing as expected. This week, it may ring once and goes straight into voicemail. How do I get this line to...
Thanks, I had wondered about that. In searching the documentation I could only find statements about remote management using LAN & WAN and nothing I found said it was blocked on WAN. Have either of you successfully changed the OAM port IP to use it over a LAN? I was thinking about trying that...
It is a BCM50e. I am able to reach the router, but the element manager does not find the BCM when it searches that IP. I have set all the remote for LAN & WAN and I have turned off the firewall just to test to see if that was a problem, but have hade no success with that either. Any suggestions?
I am new to the bcm50 and am in need of help setting up remote management. I would like to access it through our corprate LAN and have connected it to the WAN port to seperate it from the office LAN. I am unable to access the BCM through the WAN port and am wondering if I should just connect...
When people call in and terminate there call duing the message, AA continues the process and rings the attendant. Any suggestions on how to enlightn AA as to when the call is terminated and end it process?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.