Search results for query: *

keep in mind that when you going to connect directly to an other system you should cross your PRI cable. 1245 <with> 4512

Make sure you can reach your TLAN gateway Is your MGC card connected via Dual homing?

you can find the info at thread 798-1454770

First change in your FTR data block the option setting "OPT DBD" to "DBA". REQ: chg TYPE: ftr TYPE FTR_DATA CUST 0 OPT dba (enter enter enter etc) After this you can change FITA on your phone

This is the Nortel bulletin: Notice: This bulletin replaces bulletin 2008008659.1. This update has been issued to communicate some new information regarding the issue. BULLETIN ID: 2008008659, Rev 2 PUBLISHED: 2008-02-28 STATUS: Active REGION: APAC CALA EMEA GC NA PRIORITY: Major TYPE: Bulletin...

Can you post a printout of the sets?

HUNT or EHT is for hunting if the phone is busy. For No Answer the FDN and/or EFD is programmed. Try CLS FBD CFTD HTD FND and deleted the programming of HUNT, EHT, EFD and FDN

If you don't want to send the CLID, change the PRES prompt to NO on your TSP in LD 27. Or if you want to send an other CLID, use johnpool comment. DN x..x yyyy Directory Number (x..x) and CLID table entry (yyyy) - CT aaa Call Types for the DN (aaa = VCE or DTA) - MCAL 1-(4)-8 Maximum Calls...

It is not depending on the far end. It's depending on how many outgoing trunks you have.

Change CLS RNGB BUZZ RNGI Apply ringing when idle but off hook RNGB Apply ringing when idle but off hook or busy on the other

It's also possible to order a second UTIL card for Mmail for more terminal connections.

Try this after "transmit tnb" in your script the next line should be transmit "^M" Proc main string tnb integer count string szline fopen 0 "tnb.wud" read while not feof 0 SZLINE = "1" fgets 0 szline strtok tnb szline "," 1...

LD 22 REQ TID

Change your CLID entry with your HNTN code and your HLCL in your 1000E. ENTRY 0 HNTN xx HLCL xxx DIDN YES HLOC 130 LSC CLASS_FMT DN

6.7 for SMC non NTVQ01AB/NTVQ01BB 8.2 for SMC NTVQ01AB/NTVQ01BB # 5.7 for ITG-P card

This error indicates a insufficient call registers. You have increased the call registers, but you also need to give the PABX an INI.

Did you install the 100mB filter adapter (NTCW84JA)?

It's possible. In you FTR data you must add a DAPC prefix table. The default table is 0. Print table 0. Create table 1 the same as table 0 and add your extra digit in your E164 and E163 for the INTL and NATL. On your incomming route change your DAPC prompt to YES and add your just created table...

It can be a lot of things. - not correctly defined the cable lenght of you clock controller cables. - faulty superloop card, controller or Peripheral Signaling. If you have Callpilot and also AUD messages and TFS you must install a patch.

The quality is also depending on the firmware version. download the latest from the Nortel site. I think 0604DAS is the latetst.