Search results for query: *

I will have them check the ip routes to the VPN to make sure they are correct ...as its ok when you are on the LAN and VPN users. Phoneuser:)

We have setup of a IP406 where we can use the Phone Manger IP on the local Network and its works fine ...able to make and receive calls .......we have Phone Manager (unlimited)and Phone Manger IP Audio enabled in the Licenses ....we have built the ip routes for the user to work from "home" We...

I ended up setting the mailboxes to do a release (blind) transfer and forwarded the phones CFB/NA it worked great ! ....I tried doing the screened transfer when I installed the system thinking if a user forgot to forward a phone the Voicemail would handle it instead as a backup ... As...

No the user does not get voicemail she is extension 1010 use to be 1001 .... as the above post mentions I see this on the screen of the Server : 11:15:52 - EndRecording 11:15:52 - New Mail Notify(1) Mary 11:15:52 - IntuityRecordNode - Sent recording to mailbox: "1001" This is actually a...

Do you have the correct switch id in the mailbox as all others at that site ...ie switch #2 on the 4620 Phone : Page 2 of Phone is set to lwc Reception : Audix Make sure this field below Blank MWI Served User Type: Audix Name : (Name of Node-name Audix) in our case its Audix1 *We had an...

Awsome ! I will give it a try when I get back on site ....pretty darn good recall just from memory :) Phoneuser:)

Ok so that only means you are a trusted source ....still going to "1001" 11:14:40 - mailbox: Mary 11:14:40 - calling_party: 3125 11:14:40 - display_string: D P>Mary 11:14:40 - greeting_modifier: 11:14:40 - language: enu 11:14:40 - Acall_ident: 41735 11:14:40 - -...

brain freeze .......source number ......yeahhh ! great site ! Cheers:) Phoneuser

We have renumbered a few extensions after an install ... The names have remained the same in both manager and voicemail pro ....the calls get the proper greeting but through the Voicemail Pro Server I can see them get dropped to the "old" extension number that not longer exsists. 0:41:43 -...

We just inherited an NEC ELECTRA ELITE 48/192 and have the voicemail on board card with 4 ports ....the phone calls are answered by voicemail Auto Attd first and then transfer to the users when dialing the ext # .... The issue is that when a person is on the phone they never get the second...

I ended up powering down the unit twice after doing the above at commands ....I thought that this stored the commands ....but the end result is that I could get into the switch .....cheers:) Phoneuser:)

doing an at&v command shows the following setup in the 8400 at OK at&v ACTIVE PROFILE: B1 E1 L2 M0 Q0 V1 X4 Y0 &C1 &D2 &G0 &J0 &L0 &P0 &Q0 &R0 &S0 &X0 &Y0 S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:002 S07:030 S08:002 S09:006 S10:014 S12:050 S14:AAH S16:00H S18:000 S21:30H...

I ended up reloading everything as it seems not not have seen the usb key again ...giving errors ....now I can see everthing ...setting up the connection to the server using 8400 data module did the following commands through hyper-terminal : at at&f (defualts unit) ats24? ats24=001 at&w0...

correction name of Machine is bcmrserver

we are installing BCMS2 and are getting an error or actully it just stuck "trying to locate naming service" added server as bcmsserver in lower case as it is the name of the PC Machine we are using the usb superpro dongle ....loaded the drivers now seeing usb superpro .....loaded bcms...

It ended up being : hours_of_speech 5 211 *Avaya called into and set it to 211 hours from 5 not enough space to add due to fact that the system announcemnets are more then 5 hours alone ....also they had to fix the no voice ports as well ...was reading as 0 ....they said it was...

Peter So put Lan1 on its own Network scheme and the Voicemail Pro Machine as well ...then make ip routes to ......as far as the switching and routing I agree ..... Thank you Phoneuser:)

we have a 412 setup and using quite well actually with about 100 digital sets and some analogs we are using tapi with act and it works well Manager > Address of Lan 1 is: 192.168.186.22 (address) 255.255.255.0 (broadcast) Address of Lan 2 is: 192.168.186.23 255.255.255.0...

Thanks for all the posts .....my guess was the first that its not possible and we just add another DSS4450 ....but hey 60 buttons on one and fill in the rest on the second DSS will have to do .....I thought that maybe in all the button choices there may have been like a "page" function I have...

We have insalled a DSS 4450 ....the customer is going from a Legend world to an Ip office ..... is there any way to have the function like the "Legend" with page 1 - 2 -3 so that more then 50 users can be seen or do we have to add another DSS4450 We have already programmed the 50 "USERS"...