Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Silverblade

    No country code when calling internationally

    Hmmm funny. Is the provider by any chance Vodafone? I'm working in the netherlands and a collegue had a call from a customer with the exact same problem. (Although they are on a Cisco Communication manager). We did some research and in our case we suspect that provider (Vodafone) is messingup...
  2. Silverblade

    Alternate Route

    Hi Callmaster, unfortunatly i'm unable to test this, but I think it can be done as following: - create translation patterns of the numbers including the leading digit for the outside line (0, 9 or something like that). - I think it's wise to create a separate partition for these translation...
  3. Silverblade

    Restricting outbound calling to specific numbers

    Make a Route pattern (Call Routing -> Route/Hunt -> Route Pattern) with the specific number. Place it in the correct partition so it can be reached and select at "route option" (around the 11th line) "Block this pattern". That about it ;)
  4. Silverblade

    Replacing stack switches (Non-POE for POE)

    Iggsterman, thanks for your reply. I'll combine your sugestion together with what I found online and see what happens ;)
  5. Silverblade

    Replacing stack switches (Non-POE for POE)

    I'm trying to understand some of the documentation I've found to determine my best course of action. So far I've come up with this: This is de detail of the stack: Switch/Stack Mac Address : b4e9.b028.a800 H/W Current Switch# Role Mac Address...
  6. Silverblade

    Replacing stack switches (Non-POE for POE)

    Hi, I have the following stack: Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- 1 52 WS-C2960S-48FPS-L 12.2(55)SE7 C2960S-UNIVERSALK9-M 2 52...
  7. Silverblade

    cisco Aironet 2600 and cisco 2960x

    Hi xzeneize10, it's been alwhile since i've worked with wireless (So anybody if i'm wrong correct me), but i though it is something like this: AIR-CAP.... For these access-points you'll need a wireless lan controller. On this controller is the configuration made which pushes it to the access...
  8. Silverblade

    PLAR SIP issue

    Hi ReallyRotten, what do you have for partition and CSS on your Translation pattern? I've looked up some documentation that i've made years back and it is almost similar to your description. It looks as following: 1) Create PLAR Partition 2) Create PLAR CSS , in this CSS put the partition of...
  9. Silverblade

    IP Office as a Hosted PBX

    Johan are you ill? Advising Broadsoft instead of IPO :P (What happend to your Avaya blood?) (And didn't you research a option to use the IPO as a hosted platform. Didn't work out as well as expected?)
  10. Silverblade

    Delay When Entering Numbers on Phone

    [thumbsup2]
  11. Silverblade

    Delay When Entering Numbers on Phone

    The timer you are looking for is called the interdigit timeout. Here a link for cucm 3 & 4 but (if i recall correctly) on higher versions it's the same timer and can be found roughly on the same spot...
  12. Silverblade

    Cisco CME and Norstar MICS PRI

    This sounds to me like a digit timer (on a cucm it is called: dialed digit timeout) on the Norstar. It waits for a few seconds before proceding with the call (because maybe you press more digits). The hash (#) is commonly used to tell the pabx that it is the end of the digit string. So therefor...
  13. Silverblade

    SIP trunking: Avaya IP Office 500 and Cisco Call Manager

    I'm not quite sure but based on these lines a far and distant bell rang that i've had something like this years back: *Sep 5 07:52:36.435: //-1/F6CD57488007/SIP/Info/sipSPIMatchSrcIpGroup: Match not found on carrier id *Sep 5 07:52:36.435: //-1/F6CD57488007/SIP/Info/sipSPIMatchSrcIpGroup...
  14. Silverblade

    Call Forwarding

    It's not a matter of difficulty, but of understanding. I agree that some ways of programming require alot of steps, but on the other hand it's a very flexible system ;) I have to say I've never had anyting done with voicemail, but I think you should try something as following: Make a...
  15. Silverblade

    Can you Forward a Forwarded Call?

    This is because the call is offered to the huntgroup. And huntgroup call can't be diverted. The divert that is set on the phone is only for that phone (directory number)only. And a huntgroup call ignores that forward and therefore the phone still rings when the huntgroup is being called. Your...
  16. Silverblade

    can't ping 10.1.1.0

    You added the wrong route. Probably this will work better: route add <ip add of UC520> mask 255.255.255.255 <ip add of your local gateway> From there on it depends if you local gateway can route between the 2 subnets
  17. Silverblade

    Siemens Hipath Hot desking

    On the hipath 3000 series it is possible, but unfortunatly I don't remeber how it's done since it's years back I did it. The only thing I recall is that it was a hell after implementing it. Since it's not realy hotdesking but some sort of hardware/software port swap. And when multiple users at...
  18. Silverblade

    Cannt write password in Telnet ?

    Year's back I learned the hard way that not all terminal emulators support all special characters like @#$% ect. and locked myself out of the router [upsidedown] If you have one of those special characters in your password I suggest to try another terminal emulator. Putty for example I never had...
  19. Silverblade

    User has to hit button to answer call where before they could just lift the handset to answer.

    Or maybe the hook-switch of the phone is broken
  20. Silverblade

    Hipath 3000 Manager e on a Hicom 150

    Only on the Hicom 150e office series. On it's perdecessor Hicom 150 it won't work that series has a i'ts own very weird tool which I seen once and didn't make sense at all :p

Part and Inventory Search

Back
Top