Search results for query: *

do a list trace when dialing out with the visa machines and see what the machine is dialing

why not route your directory services calls to a free service like www.free411.com/. Don't forget about xxx5551212 when building your ars dig conv tables.

It worked for me. Thanks mikeydidit

we keep a copy offsite that we change out about once a month

yes we do.

a little less then 10,000 mailboxes

We are upgrading our intuity to 5.1.53 to prepare for the new dst rules. The intuity takes 3 hours to do a backup whitch it does every morning finishing around 6am. I will start the upgrade at 7am. Do I have to do another backup per the upgrade instrucations at 7am. I am tring to avoid having...

the bad battery inticator is solid green on my battery supply. When I do a self test it comes back on. Is this a problem waiting to happen?

in intuity audix it is on the first page of ch su xxxxx. It is the covering extension

you can get into the serial port of the smart jack with a laptop and see where the errors are coming from. This is not intrusive. The local phone company might not like you going into there smart jacks. We own the smart jacks between the switch and the demark so that is not a problem here.

Slip Detection: "y" if this DS1 is Primary or Secondary Synchronization Source, otherwise set to "n". I pulled this from jaymzworld site and it works for me

Mikeydidit would you please post tht step by step guide for the DST patch. Thanks in advance.

I have read that the distance from the csu to the niu should not be longer than 655 ft.

this should get you there http://support.avaya.com/japple/css/japple?temp.documentID=284806&temp.productID=129452&temp.releaseID=282211&temp.bucketID=159898&PAGE=Document

To get the delay to work on a bridged apperance the primary number station should be changed on page 3 to auto a/d y on the call apperance you want delayed

step 1 should have been telnetenable -p ipaddress (198 etc) sorry about that. I am using CM 2.1

to reset ipsi's to disable auto negotiate try doing it in this order. TELNET TO IPSI FROM GO SHELL 1. telnetenable^port^1^ipaddress(192.etc) 2. telnet^ipaddress(192.etc) 3. ipsilogin 4. login=craft 5. password=serv1ces (1 is number one) 6. show^port^1 (list speed, duplex, and negotiation) 7...

You could have a timing issue, status synchronzation and make sure you are timing off of a pri. I have seen modems and faxs fail because of this issue.

If you have auto attendent with your voice mail system you can build it in there instead of using a vector.

When we upgraded to v36 it reset everything to auto neg.We had to change the ipsi's,data switchs, and servers.