Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. McDarwin

    How to list the HDD part number installed on xSeries server?

    You need Serveraid manager version 4.80 or higher to identify the HDD FRU PN, model description and serial number. This is applicable only to Serveraid and LSI connected HDD.
  2. McDarwin

    FASTT200 Configuration with W2K

    In your Storage manager have you map your LUNS to each server's HBA?
  3. McDarwin

    Windows not working with Fastt

    HI, Did u check documentation for windows installation? Are the ff loaded? HBA drivers, RDAC, SMutils, SMagent? Did u map LUNS to windows HBA WWnames?
  4. McDarwin

    ServRAID 3L with Version 6.10.24

    Hi try stopping the Serveraid manager agent and test your tape drive. Tape drive should not be connected to 3L controller.
  5. McDarwin

    NFRD960 ERROR

    Hi jigjig, Visit IBM website www.ibm.com/pc/support and search for MIGR-39723. download the firmware diskette and NT support diskette. Update your raid driver first, upon shutdown boot from the firmware diskette. SO the next time it boot-up your raid firmware and device driver are in match...
  6. McDarwin

    ServeRaid 4-MX Hot-Spare on 2 channels

    Yes, hot spare drive is global within the raid controller.
  7. McDarwin

    Cannot see N5100 expanded array extra space in W2K?

    HI, Refer to the ServeRAID documentation, help index search for Logical drive migration. Take note there are two ways to migrate as far as i remember. 1 is to expand the array which will require you to create another logical drive. It will appear as a separate disk in win2k. another step is...
  8. McDarwin

    NFRD960 ERROR

    Hi, Make sure your ServeRAID device driver matches with firmware and BIOS of the controller.
  9. McDarwin

    configureing raid controller on NETFINITY 5500

    Hi, Use the ServeRAID DOS configuration diskette utility version 3.50 to create your array and logical drive. Match the firmware level to 3.50c if you have problems creating. Update the firmware and device drivers to current 6.10 level after installing your OS. Visit www.ibm.com/pc/support...
  10. McDarwin

    Raid5, array problem

    Yes, You have to re-create the array. The logical drive has been striped on four disks and no way to reduce its capacity.
  11. McDarwin

    IBM Netfinity 5100, Tivoli, WIN2k and "blue screen of death"

    Hi Robdot, will the exclamation mark ! in the front panel lighted-up when it shutdown? If so call for IBM tech support.
  12. McDarwin

    ServeRAID 3L and XP Pro?

    Have you tried to auto-detect the controller during installation? I assume you had extracted the file 23k4684.exe into a diskette, unlike others do they will copy the file to the diskette. IPSRAIDN is the drivers for 3L/3h/4h controllers, NFRD960 are for 4l/4m/4lx/4mx. It comes along in this...

Part and Inventory Search

Back
Top