Search results for query: *

Try http://xxx.xxx.xxx.xxx/wbm instead... That is the correct path. In the newest SP for MP you can access Manager TS with a hotlink in MP without enter username and password. You can find the hotlink under subsystem in MP /Stefan

Hello, You have to add this in format in callinfo_output_set. e.g. Only output external outgoing traffic: -subtype asb501 -format "[accessCode1 != 0]:{exit};" /Stefan

SIP is supported in mxone TSE 3.x You initiate an IP-extension ( same as for H.323 )in mx-one. e.g. GEDII:DIR=1234,csp=5,lim=1; IPEXI:DIR=1234; Then it is the terminal that desides if it will use SIP or H.323. /Stefan

Hi, When you are using fax and T.38 you don't get dialtone. You have to decide if you shall use the DRG as fax or voice-extension. e.g. Line 1 for voice Line 2 for fax T.38

Hi, In MX-ONE telephony server you are using the server as NIU. / Stefan

Hi, Tou can add PELCS:DIR=5555,SERV=10; to your personal number. d1 in serv means that repeated deflection after diversion/follow me is allowed. Default not allowed. Try it, it should work. /Stefan

Hi, Cordless phones that only is GAP compatible doesn't have support for external handover between one basestation on one ELU31 to a basestation on another ELU31. In best case the GAP compatible handset can make a handover between 2 basestations on the same ELU31. I have tried to subscribe a...

Hi, For a DECT-handset to work in MD110 it has to support GAP/CAP. Stefan

Hi, Parallell ringing is first released in MX-ONE TSW (BC13) / Stefan

Hi, Ericsson Dialog 4187 supports CLIP. Regards, Stefan

Hi, You can configure the PC-LAN port to a VLAN-ID that doesn't exist. Then the PC won't have any access to the LAN. Best regards, Stefan

Hi, You can have one R1 number for remote extensions e.g. your home phone. And one R1 number for mobile extensions from one mobile operator and one R1 number from another mobile operator. Best regards, Stefan

Hi, In ASPAP:PARNUM=173; you can change priority for calls to operator. Best regards, Stefan

Hi, Look at ASPAP:PARNUM=153; Best regards, Stefan

Hi, If you have OB 4.01 you must use ELU32. If you are trying to use IPLU, then onebox won't recognice DTMF-signalling from users that are trying to access their mailbox. You must upgrade the onebox to messaging 4.1 to be able to use IPLU. Best regards, Stefan

Hi Phonetech1, In BC12 SP7 a new config-file and software was released for DBC425 & DBC422. In the new config-file you can predefine function keys. [FunctionKeysDBC425] CallBack=1 FollowMe=2 FreeOnSecond=3 MessageWaiting=5 Transfer=6 ;Menu= ;Conference= ;CallPickUp= ;CallWaiting= ;Intrusion=...

I have done some tests with Siemens Gigaset 4010 micro in both integrated DECT and in DCT1800 GAP. The gigaset 4010 micro only has the GAP protocol so you will only have problems if you connect it to MD110. But in DCT1800 GAP it will work with some limitations. 1. The clock is reseted if you...