Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. remingtonIT

    INBOUND SPOOFED or PHANTOM Calls on PRI

    Syquest...thank you for the reply and for your help. We have the TELCO involved as they have a trap setup. The TELCO claims they have never seen anything like this before. Nor have I. We also have the Police involved in order to get ATT to deal with this under the ANNOYANCE Policy. I am...
  2. remingtonIT

    INBOUND SPOOFED or PHANTOM Calls on PRI

    Folks, I have a customer with PRI 23b+D with about 50 DID's on a NORSTAR MICS. SINCE INSTALLATION date in 2006 there are numerous, somtimes 20-30 DAILY calls recieved from tel numbers that show name/number display. These calls usually go to the main LDN on the PRI but some get to sequential...
  3. remingtonIT

    trying to locate the ip address of customer's BCM 1000

    use an IP sniffer like angrylyzer...scans the network...gives IP and hostnames
  4. remingtonIT

    Is there a way to get into call pilot from the set?

    Feature 983
  5. remingtonIT

    Norstar USA 4.0 XC rel 01 w/ PRI to USA 7.0 XC upgrade

    MICS rel 4.1 - NVRAM rel 01 upgraded (just the h/w) to NVRAM rel 02 ---- Power off-> pull NVRAM -> pull s/w card -> insert existing s/w card into new NVRAM rel 02 -> re-insert NVRAM re 02 into MICS CORE -> POWER UP within 5 minutes retored with all programming, nothing lost... SYS ID DID NOT...
  6. remingtonIT

    Toll Free Number

    Check with the telco...toll-free #'s can be restricted by NPA (area code)call Telus and insure yours and no others - North America wide - are restricted.
  7. remingtonIT

    MICS 6.0 - Redirecting calls to another location

    Walk us thru what you did in CCR programming... lets see if we can help
  8. remingtonIT

    CP100 : Does Call Center come with it ?

    >>And if I originally set-it up as mail, can I add Call Center with a keycode ??? ... Yes.... install as VMail...and setup CC after.. install keycodes anytime you want. Before, after, matters not...
  9. remingtonIT

    Can you reset the IP Address of a Call Pilot.

    Hyperterminal settings are 9600 8N1 another option is to reboot and watch the boot process and enter M ...then you will be prompted to change the IP... default is 192.168.110.10 but could have been changed.
  10. remingtonIT

    Networking Norstars

    Try IMC media converters FIBER to T1 they work well

Part and Inventory Search

Back
Top