Is there a way to get into call pilot from the set?

[rjcom]

Is there a way to program from a set? It's a real pain to have to fire up the laptop every time. I know how to get into the BCM from a set but not the call pilot.

Thanks,
Bob

 

[remingtonIT]

Feature 983

 

[exsmogger]

Unless the BCM is R4 you must use the browser to program. If the BCM is connected to the LAN it should be a simple matter of logging into the Call Pilot from any PC on the LAN.

Brian Cox

http://www.jandjcommunications.com

 

[acewarlock]

Unless it is Rls 4, Nortel does nor recommend programming from a phone set, all programming should be done though IE.