Search results for query: *

We just installed Exchange 2000 and we are having the exact same problem. It's not just one particular message either and we can't seem to find a pattern. But for some reason there are messages that open fine in Outlook but when I try to open that same message in OWA I get a "Page Not...

Thanks for all your suggestions.

My network has three subnet. One of our subnets is a test lab. On that test lab are three servers that have dual nics. We use 3com 3300 switches throughout the network. When the backups from the lab run to our backup server on the main network the router gets bogged down. I have alerts set...

I am using 3com Network Supervisor to monitor our network. We are having that same issue and our network is segmented. I've set alerts on the links that are connected to the router, the router and the switches. While the network supervisor show alerts traffic passes just fine. I am also...

Can you download the IPSEC feature pack from Cisco's website for free?

Thank you all for your tips. I'm not sure why but nothing helped so I decided to reboot my work station. Once I did that I was able to connect to the console with no problem.

I have already removed the IP name-server entry. When I look at the start or running config there is not a name server configured.

No, I'm not trying to telnet to the console port. I have the console port connected to my work station as it should be. When I restart the router I see through the image decompressing in the hyperterminal window. Once it's done it says "Press Return to Get started". Then the next...

Is it possible to configure IPSEC on a 2610 or 2621 router?

I have remove my router from the rack so that I can reconfigure it. However when I connect to the console port the following message is displayed: Translating "router" domain server (255.255.255.255) and it won't clear or let me go any further. Yet, if I put the router back on then...

I went to that page yesterday and it had all the information that I needed. Thanks for all your help!:-)

Thanks for the help! That's exactly what I needed. :-) Now I have one other questions. When you choose to download an image from Cisco's web site because you want to upgrade to a newer image how do you know which image is for which router. I think that's what caused my problem originally. I...

I have a bad image on a 2621 router. I did backup the old configuration but I'm not sure about using the XMODEM command. On the router I type in "xmodem -c c2600-js-mz.120-2.XC2". The router appears to go through the rest of the steps and then when it asks if I want to continue I...

We had a power outage and we thought we lost the flash on our router because when it would start up an error messge would come up stating that the flash could not be located. We tried to reinstall the flash several times with no luck. We then reseated the flash and now when the router boots...

We are not trying to load balance. We have a seperate T1 that we are using for our phone system and another T1 line that connects our sites (point to point) using the 2610s. Since we are not using all the T1 channels on the voice line we want to take some of the channels from the voice T1 and...

We have are connected to a remote site by a T1 using cisco 2600s. We have also have a voice line connected to that remote site that uses a T1 but because it is rarely in use we would like to split that T1 and combine it with our data T1 to increase our available bandwidth. Our 2600 only...