indywright
MIS
We have are connected to a remote site by a T1 using cisco 2600s. We have also have a voice line connected to that remote site that uses a T1 but because it is rarely in use we would like to split that T1 and combine it with our data T1 to increase our available bandwidth. Our 2600 only supports a T1. We are wondering if it is possible to combine the full T1 with some of the channels from the other T1 that we are not using, run that combined line into an external CSU/DSU and then connect the combined channels into our router. If anyone has any suggestions please let me know.