Search results for query: *

Do this: create vlan voice conf vlan voice tag <vlan-tag-you-want> conf vlan voice ipaddress 192.168.200.1/24 create vlan data conf vlan data tag <vlan-tag-you-want> conf vlan data ipaddress 192.168.100.1/24 enable ipforwarding voice enable ipforwarding data That's pretty much it!

See if the communities actually exist: Type in "show management" and see how many communities are listed as RO/RW. You should see something like: Total Read Only Communities : 1 Total Read Write Communities : 1 If you issue "show snmpv3 community" you should be able to see them...

Normally for the Avaya phones to boot you need both the voice and the data vlan. There is no special configuration you need to do. If you are able to get IP addresses on either vlan on the Extreme switch you should be able to get them easily on the Cisco switch. * Have you tried getting a...

I am not sure if you can specifically configure an IPv6 dhcp server. I am pretty sure when I did this in my tests, I did it with an IPv4 server running with a dual stack. Just remember you have to configure your router advertisements to be "autonomous off", and turn "other-config on

Glad you got it working! You can also use Ridgeline for doing so. It actually is pretty useful for that. Once you add all the devices to it, you can go into the reporting part, and look at your serial numbers (also includes the serial numbers for all members of a stack) and get them from...

If you use the "encrypted" flag the switch expects a one way hash as the password. When you put in "testpw!" that became the 1 way hash for the password. Simple run "config account admin" and hit enter and it will ask you for the password. After confirming it the switch will automatically...

Not sure if this helps you very much, but what you want to look at is spanning tree protocol (STP) or multiple spanning tree protocol (MSTP). I wish I had a good example config for you but I unfortunately don't. I remember looking at it a while back and thinking that MSTP was what we would...

I am assuming two things: A. ) You want arp poiosning protection b. ) You mean a Black Diamond 6808 In Extremeware 7.7 you can use the following command: enable ip-security arp gratuitous-protection vlan [<vlan name> | all] Description: Enables the gratuitous ARP validation on the selected...

We actually buy all our gibs from advantageoptics.com now. They are much cheaper than the ones that extreme resells. http://www.advantageoptics.com/Extreme-SFP.html I am not affiliated with them in any way, but we have not had any problems with their products. HTH

The Extreme switches can be send their logs to a syslog server. On the X series switches that use XOS you'd use the following: conf syslog add <ip address of syslog server> vr vr-default local0 enable syslog This tells the switch to send all of it's syslog traffic using the default virtual...

No, usually you only need additional licenses if you want to run multiple OSPF instances. If you want to route between the vlans just issue the commands: * give the VLANs an IP address on the switch: conf vlan <vlan name> ipaddress x.x.x.x/x * enable ip forwarding on the vlans you want to...

When you say trunking, do you mean like VLAN trunking (like vtp) or port aggregation (grouping)? Extreme switches do not support VTP or VLAN trunking, but they do support port aggregation/grouping. As far as connecting the 5 switches together, all of them should have at least two 1gb ethernet...

Thanks for your reply guys. I actually had several things wrong, which I was able to resolve over the last couple days. The clients weren't assigned to the site. Apparently we had a replication issue between the local DCs and a remote DC, which caused the clients to look for an outdated site...

Hi everyone, I am experiencing problems getting the advanced client installed on XP SP2 machines. When I go to install the client via a push install (right click on a computer in a collection, and select install), the computer never starts installing the client. I am using SMS 2003 with SP-1...

billy, I recently started working on SMS and this is how we got Office 2003. We used the custom Office 2003 Resource Kit to create a custom install file using the program that was in the resource kit: http://download.microsoft.com/download/0/e/d/0eda9ae6-f5c9-44be-98c7-ccc3016a296a/ork.exe...

I know that AutoUpdate Architect is a little differnt, but in ePolicy Orchestrator the .Z files are for packages such as Virus Scan Enterprise, or Stinger. I believe they contain a list of files to be copied into the repository and have a point of reference on what is needed to be downloaded in...

Hi everyone, First post here but I've been an avid reader for a while. I searched through the forums and found some older posts concerning this issue, but I just wanted to double check that nothing had really changed since then. What I would like to be able to do is have the HW Inventory...

You should be able to use your master repository for updateing your clients on the network. I think you can specify the order in which the clients seek the repositories, when you open up the console, log in and do the following. 1. Click on your top level directory 2. Click on the policies tab...

Hotbar attaches itself to emails, it puts a little bar at the bottom of the email saying &quot;Click here to add smilies to your email.&quot; Many users who think this is &quot;cute&quot; click on the link and it gets installed on their machine. We were having serveral issues with Hotbar back...

Try unistalling it again, and remove the MSDE, make sure you check before installation if it is completely, gone, and stop all the services for the MSDE, and then try reinstalling it. If that doesn't help, try calling McAfee /shrudder Hope that helps, Sven