Search results for query: *

Hi jnetworkingsolutions, I am trying to setup IPO running with les.net. Would you share your configuration information on the IPO side with screenshots of the applicable settings. Any help on this would be greatly appreciated. Thank you!

How would programming be done on IPO 3.1 to block inbound calls with no CLID or CLID set to WITHHELD? We want to block all inbound calls where no CLID is presented to IPO switch. System has PRI for main circuit.

Thanks for the thoughts... There is no musiconhold.wav file in the Manager directory. A reboot has been done, but it was done from within Manager. I assume you are speaking then of power cycling the 403 to accomplish the reboot? Also, could it be that a musiconhold.wav file with dead air was...

Hooked up a known good audio input to the jack on the back of a 403. Prior programmer had disabled MOH somehow, and even with live input to the jack, no MOH present with putting a caller on hold, or *34 either. Can anyone think of how prior programmer would have "disabled" MOH so that...

Is there anyway to electronically adjust the gain +/- through a Manager setting? Our line audio feed is obviously too hot and is getting complaints from callers that it's too loud.

I don't have a clue ( which doesn't mean too much in this forum because I am a newbie )... But, I do have angles into Avaya tech support so maybe I can help that way. Please email me if interested and I will pursue ASAP.

Other than too tired to spell very well, I did manage last night to get it all working. I am on a desktop with PPTP connection through an ISDN BRI to the Internet. Works pretty well.. Just wish that Avaya would come out with BRI U interfaces...

I don't see the setting you are referring to. Using Manager V2.0. Can you please tell me which screen and tab position this parameter is on? thanks!

I have a hunt group with ringing set to Group, and a line group pointed to this group. How can we get successive inbound calls to ring at an extension if they are already on another call? It seems that the behavior of this type of hunt group is that ringing will occur at every other phone in...

Just wondering if anyone has gotten Phone Manager iPro woring over a PPTP VPN? I can get the iPro up, make calls, but am not transferring voice. 403 behind a broadband router running about T1 on wireless link. NT Security Domain environment. PPTP terminates on a 2000 Server. iPro running on...

IP 403 hooked to POTS comming off of two different brands of ISDN BRI TA's. Adtran and Ascend CLID worked just fine off of these TA's with Partner ACS 3, Now hooked into 403 we see the CLID repeating itself across the displays on the phones. What might I do to correct this? Or better yet...

I think it might have something to do with my router/firewall application. I moved Voice Mail Pro over to a Win2003 server with no junk on it and it seems fine now.

Yes, this does work, but what if you still want to obtain and process Caller ID information? I guess its one or the other? Thanks

When I do a *17 I see: ?Username Conn In the display and I get continuous dead air. Here is the log during the *17 event: 17:19:30 - Voicemail Pro Server Version 2.0 (16) 17:22:00 - 192.168.27.8 - Awaiting load of config, access to voice mail denied. 17:22:07 -...

Just setting up IP Office 403 with VM Pro for the first time. I thought by default users would have mailboxes automatically created and active. I think this might be a clue ( extracted from log below ): 0 mailboxes were open (but not active) when flushed Here is text from VM Pro Server...

Thanks for the suggestion. I had already done that... But the thoughts about what the yellow LED meant were helpful. It turns out that the ACS processor module wasn't seated well in the cabinet. I had been reseating the VM stuff, but not the ACS. I'm not sure who polls who, but obviously the two...

Hey guys... I have same problem, but have the configuration all good I think.. I just installed the system a day ago and LED was solid green. Left running overnight without programming 505 and now solid yellow. Partner ACS R6 with Partner Messaging R6. Removed Messaging Module from carrier and...

We get a busy tone on a Partner ACS when trying to do a simultaneous page I*70. I*XX to individual extensions works just fine. What could be the problem?

Evidently, there is a code to do a "cold" restart on the Partner ACS. I was told this by an Avaya person, but they wouldn't tell me what it was due to fear for loss of their job. It is something different than the #728..... Supposedly, its recommended sometimes when upgrades fail, and...