Search results for query: *

hello, how can i configure the DISA in the hipath 3000 manager? thanks

hello, thanks for your responses but i don't know how can i configure a prefix in the LCR to route through 3800 what faisecau i should use?

hello, I have two hipath systemes 3800 and 3550 which are connected by IP trunk , i want to configure a prefix code wich let an ip phone that is connected to the hipath 3550 to make a call through a line configured in the hipath 3800? is this possible and how can i do that? thanks

what does mean 3CX system and 3CX phone for android must be located at the same LAN?

hello, what does mean 3CX phone system and 3CX phone must be located in the same LAN ?

hello, what are the necessary licenses to can configure the VPN in the HG 1500?

hello, in the hipath manager E call management--> call forwarding table what does mean defined user in the destination type? thanks

hello, i work with a 3800 hipath system , i connected two ip phones openstage 40 and 60 to the system, there are successfully detected by the hipath manager ( the ip address, netmask, gateway, terminal number are configured) but when i try to exchange a calls between them it shows actually...

I searched for this error code i found that it is an incompatible Security profile what does mean that?

hello, the openstage shows telephony is down Hd2, what can be the problem and how can i resolve that? thanks

hello, thank you for your response, the phones are registered successfully but when i tried to call each other it shows actually impossible so i tried to reboot the system but is shows now telephony is down H02, Hd2 what can be the problem?

hello, thanks for your response, it is done successfully but the ip phones still shows telephony is down H02, i configured the phones (openstage40 and 60) as a system client in the manager but it are not detected by the system what can be the problem?

hello, i work with hipath 3800 and want to install the comscendo license for openstage ip phones who can give me the steps to do that. thanks in advance.

hi all, I want to setup VPN between UC520 in one site and SRP527 in another site. Let me know what configuration needs to be done on UC520 and SRP527. thanks in advance.

hello, i want to establich a vpn connectin between the UC520 and SRP527 router to exchange communication between them over the voip. who can help me with a documentation? thanks

hello, i want to copy the files of firmware to the flash of UC520 so i configured a tftp server in the pc with th ip address 192.168.1.67 and i pointed option 150 to my tftp server address,the problem that when i try to copy the files in the flash it shows %Error opening...

i tried to ping 192.168.1.100 but no response

hello, yes i turned it in and off, the ip address of UC520 is 192.168.1.100 and is connected to 4 ip phones, the pc is connected to the UC520 with RJ45 cable and is in the same plage of addess with the UC520.

hello, i added a static route to the pc "route add 10.1.1.0 mask 255.255.255.0 <ip add of UC520> but the pc can't ping the 10.1.1.1 what can be the problem? thanks

hello, i added a static route to the pc with the command add route 10.1.1.0 mask 255.255.255.255 <addip UC520> but the pc still can't ping 10.1.1.1 what can be the problem?