Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

can't ping 10.1.1.0

Status
Not open for further replies.

kattoussa

Technical User
Apr 19, 2013
53
TN
hello,
i added a static route to the pc "route add 10.1.1.0 mask 255.255.255.0 <ip add of UC520> but the pc can't ping the 10.1.1.1 what can be the problem? thanks
 
with the amount of information you've provided for trouble shooting i would say :
have you truned it on and off again ?


topology?
configuration of UC520 ?
how is the PC connected... etc..


We must go always forward, not backward
always up, not down and always twirling twirling towards infinity.
 
hello,
yes i turned it in and off, the ip address of UC520 is 192.168.1.100 and is connected to 4 ip phones, the pc is connected to the UC520 with RJ45 cable and is in the same plage of addess with the UC520.
 
i tried to ping 192.168.1.100 but no response
 
You added the wrong route. Probably this will work better:

route add <ip add of UC520> mask 255.255.255.255 <ip add of your local gateway>

From there on it depends if you local gateway can route between the 2 subnets
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top