can't ping 10.1.1.0

[kattoussa]

hello,
i added a static route to the pc "route add 10.1.1.0 mask 255.255.255.0 <ip add of UC520> but the pc can't ping the 10.1.1.1 what can be the problem? thanks

 

[imbadatthis]

with the amount of information you've provided for trouble shooting i would say :
have you truned it on and off again ?


topology?
configuration of UC520 ?
how is the PC connected... etc..


We must go always forward, not backward
always up, not down and always twirling twirling towards infinity.

 

[kattoussa]

hello,
yes i turned it in and off, the ip address of UC520 is 192.168.1.100 and is connected to 4 ip phones, the pc is connected to the UC520 with RJ45 cable and is in the same plage of addess with the UC520.

 

[kattoussa]

i tried to ping 192.168.1.100 but no response

 

[Silverblade]

You added the wrong route. Probably this will work better:

route add <ip add of UC520> mask 255.255.255.255 <ip add of your local gateway>

From there on it depends if you local gateway can route between the 2 subnets