Search results for query: *

can get this alarm when there's an old IPU board or 2nd NIU board causing the system in trying to load from it instead of the proper NIU" with your build disc in. pull all other IPU boards out and button the system for it to load correctly

As xs650 states the actual install to a standalone PC or server is easy, just need a BP program lead from the servers serial port to a V24 port on the CPU. Even trying to explain on here the setup of groups and user rights on the CCS would take all day and I suggest you get an expert in to...

Could be your LCR on the trunks. check command 1028 on your trunks on the BTU-D board and mark all trunks and turn off. Try and make your call, if it now works its something in TCD or check LCR table in command 2240. Dont forget to turn on LCR again once you made the test calls....:-) triplebee

Just tried that and still no job im afraid. On PARNUM 177 the options are 0-1-2-4-8-16 or 32, and for PARNUM 154 they are 0-1 or 2. Tried these variuos ways but still silence. Any other ideas most welcome. Triplebee

no probs glad you got it sorted

parnum will give it a try and give you a big thumbs up if it works...!!!!

if your after info/revisions like on a CNLIP or CNBIP you cant as these cards don't report via these commands. You can view all connected extensions in the lim Switch via LSCOP. You could try CNBIP:LIM=xxx,BRDNAM=SESBOARDS; Triplebee

Mouafy, why do you need to know? The business phone can happily work off a single power unit will all 9 slots in use. You can work out the power consumption via the O&M manual but if its just a general "am i OK with these cards in my system" you be fine

Like etompau says if your certified to work on the equipment Aastra website allows all firmware and documentation. Here in the UK I think http://www.nimans.net/ can help you, but again they will probably ask for your company name for certified engineers. Nobody on here will pass you this...

HI, You need to do the following, but its not straight forward to get working if you don't know what your doing, this is a rough guide as a start so please don't hold me to ransom, if in doubt ask a service provider to help: need to setup carriers in command 8401 setup external access codes...

HI, I have a customer who requires just a "beep" tone instead of silence whilst customers are on hold. I have looked at ASPAC:parnum=177 and this is set to 0. PARNUM 154 is set to 2 for available music sources. PARNUM 177 can be set from 0-7 in Alex. Is there a setting to get this to work as...