Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Int- nat call from BP250 Tru ISDN Pri

Status
Not open for further replies.

teenu3

Technical User
Jul 20, 2012
98
IN
Hi ALL,

I can call many places in southafrica but i cano dial some num like
002741 92xxxxx
002741 99xxxxx
it is going from my cell phone.
some nubers in the same number area is going all so
What can be the problem?

Regards
 
maybe blocked by TCD?
Try to set the phone to TCD 0.
If you use TCD 0 I would make an onboad trace to see what the provider answers
 
Thanks XS 650,
all exts are TCD 0 . I am not sure how to do an onboard trace

Regards
 
-go to Maintenace->Tracing->onboard Tracing and press Start on the BTU-D
-make the call
-press Stop and Read and you get the ISDN trace where you can see what the provider sends back
 
Thanks xs650,
You have been great help thanks

Regards
 
Could be your LCR on the trunks. check command 1028 on your trunks on the BTU-D board and mark all trunks and turn off. Try and make your call, if it now works its something in TCD or check LCR table in command 2240. Dont forget to turn on LCR again once you made the test calls....:)

triplebee
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top