how to program LCR BP250 1

[Mouafy]

please i need to know how to program th LCR on BP 250 && thans

 

[Mouafy]

i can't understand any thing from Astraa documentation

 

[triplebee]

HI,

You need to do the following, but its not straight forward to get working if you don't know what your doing, this is a rough guide as a start so please don't hold me to ransom, if in doubt ask a service provider to help:

need to setup carriers in command 8401
setup external access codes for carriers in 8415
setup tenant groups in 8420
setup destination groups in 8440
setup time scheme in 8445
setup destination number within command 2240
set 2034 to yes
2035 to 30
ensure all ext's are tenant group 0
0152 set to no
0153 set to no
0154 set to 2
switch on the trunks you want LCR on via command 1028
ensure 1029 all trunks are in tenant group 0

AGAIN IVE DONE 100'S OF SITES LCR AND ITS STILL A TRICKY SETUP SO I SUGGEST YOU GET SOMEONE TO DO THIS FOR YOU. tHIS IS FOR INFORMATION PURPOSES ONLY..!!!!!!

Triplebb

 

[Mouafy]

it was very helpful , thanks i've already setup it , the problem was that i didn't sebd the carrier arrangment to B-Number ,,, thank you very much

 

[triplebee]

no probs glad you got it sorted

 

[Mouafy]

it is my pleasure