Search results for query: *

Sending it out for repair. Will keep you posted as to the solution. Thanks for all your response. Rich[thumbsup]

Brian. Yes I have flashed the unit from a 8.0 to a 7.0 several times. And then from a 7.0 back to a 8.0 several times but the same results each time. When the unit is a 8.0 and in key mode the trouble is back. I suppose I could just leave it as a 7.0 but I'm stubborn. What I meant when I wrote...

Yes. I did the #989 clear several times, and then backed it up both to the internal and pc card while in that state, I also did that while the unit was a 7.0 and as a 8.0. As I mentioned, as long as the system stays as a 7.0 it works fine in both Keyed and Hybrid. If I bump it up to a 8.0 in the...

I have a ACS 8.0 on my test bench that I took in for spare, emergency use. When I got the unit it was set up in the Hybrid mode with 6 CO lines in pool 880. It was working fine in that mode. My goal is to set the unit up in the key mode with 5 lines and make everything factory default. This way...

TTT...As always "you are the man".... My mistake was I was approaching the conference from the 3rd party wanting to join the call in progress instead of the 2 stations already talking inviting the 3rd party into the conference. Live & learn. A star for you! Thanks

I have a customer that has a ACS 8.0 and has stations off the system in three separate buildings all about 50 feet apart. The question is this. If lets say Px 15 and Px 16 are both in bldg # 1 [ separate offices within ]. Now Px 15 makes a call via the intercom to Px 20 which is in building #...

OK..I went the CO loop around route posted by Merlinman,... although I know TTTommy has often posted the same suggestion on other occasions so I want to thank both of you for your help. I went the CO route because of customer preference. I wired analog Px 55 to the trunk port for trunk 816 and...

TTTommy. Thanks again for the info....I will present the options to the customer but my gut feeling is that I will wind up making the Px 55 analog set a MLX set, and have all three telephone sets look the same with the CO loop around option. Keep it simple smart,... with the exception that the...

Merlinman...Good idea but I will try TTTommys solution first. I have not been back to the customers site yet to try things out but I had another thought. A question for both of you.... With TTTommys solution, will a call to the emergency analog station Px 55 be able to be answered at all 3...

TT Tommy. Thank You for the reply & solution. I will be onsite next week to try it...You are a wealth of use full information. A star for you!!!. Rich

I have a customer with a legend,I Do not know what release it is but for the sake of my question I do not think it matters. My question is this, Is it possible to have a bridged analog extension number appear on a spare button on a MLX set. It's been a long time since I had to program and...

I have been asked if it is possible to have a caller choose a different language for call prompts after the main Auto attendant greeting is heard in English. The customer would like to offer the caller to hear the prompts in 5 other languages. I'm guessing that this can be accomplished with sub...

Partner ACS 4.0..My question is there a way for a extension to receive and answer intercom calls, while the extension is call forwarded to another extension. I tried manual signaling, no luck. Setup as follows ------Boss call forwards his extension to his assistant. She takes all of his calls...

UPDATE as of 2:30. Verizon shows up and tells the front desk that he found the lines were still working in the old copper condition, When he first arrived onsite I asked him to please call me back when he was finished and let me know the progress he was making to remove all circuits from their...

OK. New update as of this morning. First I spoke to a dispatcher at the Police Emergency Center that has actually seen these calls while on duty and after questioning her she told me that when a call comes in, that it only rings once and then immediately hangs up, so that they do not even see...

Update...Since a false call was made right after or during my working with the office manager at ext 10 I have had her disconnect the tel set from the wall jack just to wait & see if the calls stop. Since ext 10 is in a conference room they can do without it for a few days. I still can't imagine...

WikiTech. Thanks for the reply but since we disconnected both circuits that the alarm panel uses [for 5 days] and a false call still was made to the police, we had to rule out the thought that the alarm panel was the trouble maker. Besides the fact that the only way the alarm panel would call...

OK..This one has got me stumped so I have to ask. I have a ACS 4.0 308EC, 400 board and a partner messaging 7.0 with a 6 port card. Having said that, here is the question. Is there any way, even off the wall way, that the system could be calling 911 direct to the local police randomly. Dial tone...

Do you have a green power light lit on the unit or is it dark?

GatorDave. Your problem sounds like the " Lights on but no ones home " issue with some of the 509 boards. I have had this happen on the 7.0 & 8.0 boards and I believe power on/off may cause it. I have been told that the unit has to be re-flashed for a fix. I have had this same issue on 4 boards...