Search results for query: *

I like the Procomm script option also before you go and pay the money for OTM. A concern I have with the SEB's is that correct me if I am worng, you also need the server part to program the Trigger words and what not? So this can be a very expensive route.

Or if you really want to have your own alarm monitoring. Get otm with alarm management and set up the alarm scripts to call you.

Why don't you just us the VT220 go to advanced and uncheck the 8bit and the fKeys will work just fine.

Yes you will need to program each SEBll, they also have a new SEBea device that will receive SNMP traps and filter them traps and forward them onto the Iris server for alarms management. It is a very versital system that you will be able to run vertually any scripted you need for you situation.

Question. Are you running Windows Xp And are you on CallPilot 2.0 if you are you will need to install a PEP on your client machine

You can configure the Cisco Gateway pri as a Nortel Sl-1 Network Side and configure the Nortel PRi as the SL-1 user side and utilize the MCDN functionality. My opinion is if you Nortel in your enviroment and you want to try VoIP, you should leverage you existing investment with the IP enabled...

First of all you should stay with Nortel on VoIP. Are you trying to connect a T-1 to the Call Manager?

Since there are connection to the PBX you just need to get the active IP address. Write it down, when you get back to your pc Ping the address. If it comes back with a echo disconnect the cat 5 to the tranceives and try the ping command again. You should have no echo's. If you understand the...

You need to make sure you have properly Subnetted out the PBX from the rest of the Corporate lan and have a gateway to the cusotomer lan. The Nortel does not like broadcast and these could cause problems.

ld 137 stat elnk And you will get the active IP of the port

Why don't you try and connect the PBX directly to the Network Via the Ethernet ports on the PABX

I have OTM and HP_OpenView, I am sending up-stream traps to the OPen_View from OTM but OP does not reconize SNMP traps can anyone help

Does anyone currently have SNMP configured into there network. We are setting up SNMP across our network and have some questions with OTM-sending up_stream alarms to Hp _OpenView and sendig them direct from the Meridian 1. Basically my question has to do with understanding the MIB's presented to...

You night want to try and setting Cls cfxd to cfxa this may take care of your problem on the Phantom TN