Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. brainey1

    Forward unconditionally takes me to the user's VM! Why's this happening?

    You probably need to turn off DND.
  2. brainey1

    R8 and Virtual Licenses

    According to Catalyst Telecom, no license are needed if a call is attempted on R7 and then upgrade to 8.0.42 within the 90 days. I'm still skeptical but will find out Monday evening when I try it.
  3. brainey1

    Avaya IPO and Remote Phones

    I had the same issue with the far end using ATT Uverse. Finally found out that when a call went out on the uverse, it was using the gateway address of the uverse modem which was different than the static ip program on the firewall I was given from ATT. So the audio didn't know how to get back to...
  4. brainey1

    9608 Phone Firmware

    Will the 9608 sets do LLDP and or DHCP with the new firmware?
  5. brainey1

    Strange Analog Noise on Call Pickup with Verizion FIOS Analog

    I did the butt set test on the first customer with the problem. I had it in monitor mode and never heard the sound while at the same time hearing it on a 9620. I also used the butt set on an analog port answering an incoming cal with it but never heard it. I did hear the caller id burst on the...
  6. brainey1

    Strange Analog Noise on Call Pickup with Verizion FIOS Analog

    Since my last post, i have had the trouble again. This time a 500v2 70.12 using norstar sets. I immediately replaced every piece of equipment. The new equipment had the same issue. The dial tone provider was an ILEC (AT&T). The first time was with a small mom and pop privider so I figured it was...
  7. brainey1

    Strange Analog Noise on Call Pickup with Verizion FIOS Analog

    I had the same issue on a 500V2. After swapping out all equipment, I finally took the trunk cards out and installed an old IP 400 analog trunk 16. Problem solved, never happened again after that point.
  8. brainey1

    Best SIP trunk provider

    I have only used Nuvox (Windstream). Haven't had any trouble or quality issues yet. Hope I didn't just jinx it.
  9. brainey1

    Downgrade Firmware of 5410/5420

    If you use a 3rd party TFTP server and point it to the Manager folder, it will downgrade. For what ever reason, the Manager app will not let it downgrade or atleast not for me.
  10. brainey1

    Sip Jitter Problem

    I am curious about this also. The IPO doesn't provide QOS, it just tags the packets for QOS. I am seeing the same problem with Nuvox. I have them looking at it now. Have you had any complaints from the customer? I have two with SIP with Nuvox and neither has complained. I wonder how accurate the...
  11. brainey1

    VM to email using GoDaddy as the smtp server

    Has anyone successfully used godaddy for the smtp server for vm to email? If so, can you give me an idea of what was done differently. When I try to validate in control panel, itnever times out or gives me an error. It just keeps counting.
  12. brainey1

    Packet loss shows in SSA under QOS (5.0)

    groundedagain, when the nic was faulty, was it completely down ot just have problems from time to time?
  13. brainey1

    Packet loss shows in SSA under QOS (5.0)

    Are you having the QoS trouble on all calls or just on ip trunks?
  14. brainey1

    SIP Providers in Southeast US

    @fshaw, we had the same problem with MOH. The most used CLEC in this area is Nuvox. It was a release issue in the Cisco IAD. Once they upgrade the firmware, it was magically fixed.
  15. brainey1

    ipo to legend

    I could only get it working with a Legend as T1 E & M tie trunks.
  16. brainey1

    IP Phones Bad Quality

    Sounds like the audio codec doesn't match up.
  17. brainey1

    IP Phones Bad Quality

    If you get it working, post what you had to do to get it to work on Nuvox.
  18. brainey1

    call screen

    It would be nice if they could get that working. I have alot of request for that feature.
  19. brainey1

    tapi woes

    I have the same problem. Once i went to Office 2007, my dialing from outlook will not work. Removed, installed and rebooted 100 times. Still no good. I have always had it working until now.
  20. brainey1

    Line Appearance on PRI

    if you select the line appearence for a B channel. I just tried it to see what would happen.

Part and Inventory Search

Back
Top