I am trying to set up the modem for remote access.. I have a POTS lines connected and it does dial in and is answered but after the username and password is verified I get and a 628 error... What am I doing wrong ??? Please help
Hello I am having a problem with a BCM 400 running 3.7 software. The BCM was in trouble and all the lights were flashing so we changed out the hard drive and that stabilized the system... The problem now is that LAN 1 & 2 along with the serial port are inaccessible. When we ping LAN 1 we get...
Hello I am having a problem with a BCM 400 running 3.7 software. The BCM was in trouble and all the lights were flashing so we changed out the hard drive and that stabilized the system... The problem now is that LAN 1 & 2 along with the serial port are inaccessible. When we ping LAN 1 we get...
Hello I am having a problem with a BCM 400 running 3.7 software. The BCM was in trouble and all the lights were flashing so we changed out the hard drive and that stabilized the system... The problem now is that LAN 1 & 2 along with the serial port are inaccessible. When we ping LAN 1 we get...
Hello I was able to load Virtual XP machine and load and start up NRU11 but my question is how can I link the software with the internal HP LSI HDA modem ??? Cn this be done or do I have to add a second modem which would be an external....
This is for stsguy..... so you what your saying is all trunks will be on the expansion card in slot two starting from the top.... port 8 and work there way done.... And the station modules will start on expansion card in slot one port 12 and work there way done... so when we went to 12 ports...
Hello All,
I need some serious help.... I have a 0x32 running USA MICS_XC 6.1 FC software and 2 6 port fiber expansions... Also connected is four trunk modules starting on slot one on ports 12, 11, 10 and 9 on the left...I know that 13 and 14 are for companion....Stations are starting on the...
Hello All,
I need some serious help.... I have a 0x32 running USA MICS_XC 6.1 FC software and 2 6 port fiber expansions... Also connected is four trunk modules starting on slot one on ports 12, 11, 10 and 9 on the left...I know that 13 and 14 are for companion....Stations are starting on the...
GOT IT WORKING !!!! That you guys so much for your help. It was the redirect dn. I checked by using the VM manager and it was checked. I unchecked it and the calls are now going to the mailboxes like they should.
THANKS AGAIN !!!!!
Ok here is the probem. Calls coming over the dids are not being routed to the users vm box. It seems that they are getting to voicemail but to the directory message. The call is answered by voicemail and then it says "using the dial pad enter the extension you wish to call" The problem all...
I have a BCM 400 running 4.0 software.The system is in trouble and needs to be serviced. There is a problem though. The admin password has been changed and I am unable to access the system using Element Manager. Is there some way to reset the admin passcode????
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.