Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Norstar Voicemail 4.0 1

Status
Not open for further replies.

sdm139

Programmer
Apr 1, 2008
14
US
Ok here is the probem. Calls coming over the dids are not being routed to the users vm box. It seems that they are getting to voicemail but to the directory message. The call is answered by voicemail and then it says "using the dial pad enter the extension you wish to call" The problem all started after there was a brown out. The voicemail system died and was replaced with the same version. All cfna is set to correct vm dn. Now here is the kicker. When you make an intercom call the correct voicemail box picks up. any help will be greatly appreciated.
 
go through the vmail manager and check the option for network dn if checked ,uncheck it ,if unchecked ,check it
i remember having that problem ,i think this is the fix for it

HALLOWED ARE THE ORI

mike
 
I did this but when I pressed 8 nothing came up ????
 
Were could I find the patch for redirect dn....
 
GOT IT WORKING !!!! That you guys so much for your help. It was the redirect dn. I checked by using the VM manager and it was checked. I unchecked it and the calls are now going to the mailboxes like they should.


THANKS AGAIN !!!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top