Search results for query: *

I found that patch and it is installed and in service. I am not having any QOS issues. Any other ideas?

@Firebird...are you saying the patch is the fix or the cause of the issue?

I have the same issue. Vendor told me analog trunks are not supported on the CS1000 6.0 and we converted to TMDI PRI. Works fine now.

Sounds like you should call Shaw Communications.

SRPT4653 VGW channel TN 004-00-00-03 (403) connected to farEnd 10.110.24.210:32276 TN 252-00-00-01 (fc01) was closed incorrectly, current state = RxTxOpen Anyone know why this keeps happening on different VGW's? It even happens withing the same MG1010 chassis. I have a 6.0 CS1000 with (6)...

Ok, we finally figured this out. How strange! we had to change the screen vewing size on the server video settings. We had to go directly to the server, it doesn't work if you do remotely.

On Jamiepockets note, we have 92 sites with 8 port switches (not hubs) that have all of the elan connections going to it and then one uplink to the main 48 port cisco switch. I know for sure that the Cisco is set to 10m but what about the 8 port switches, can I set those? They are Netgear switches.

We have the same issue. It appears that this happens only when the sig server actually loses power and is not shut down properly. We have 93 signalling servers in our network and it has been consistently power issues and not just reboots.

Well, they wouldn't help us because we are not customers even though we paid for their software, that makes me mad. Anyway, we figured this out. You have to adjust the screen settings on the server itself. I still don't understand that, but we did it and it works. Thanks for the help.

Ok, thank you. I will try them.

We have checked both the browser window, etc. Our vendor doesn't have a clue about it. I have searched Nortel's website and can't find anything. It does the same thing on the server its on and any other machine we use. We were thinking about reloading TM to see if that fixes it.

It has always been there since we upgraded from 2.2

Yes, I understand that, but it will show 50 sets lets say, but you can only see it 2 lines at a time. If you scroll down, you can see the rest, it is just the window size is too small. It has nothing to do with the sync, this is just the viewing window size. Not the type of search or anything.

We upgraded our OTM 2.2 to TM 3.0. The window viewing size is only 2 lines deep on searching telephones meaning you can only see 2 sets at a time. Anyone know how to make it bigger? During a prestentatino of the new release, we saw a slide that showed it much bigger, say 5-6 lines long.

Voice Network REL 4.5 5 CS1000MG's REL 4.5 87 CS1000 Branches REL 4.5 NRS, signalling servers running 4.5W Fiber backbone connecting all sites with Cisco Network About a month ago, we had a major network outage. Soon after that, we started getting intermittent CNF020 errors on our branches and...