Search results for query: *

Take a look at Algo Solutions http://www.algosolutions.com/products/call-recording-desktop/index.html They have a CCR for 2050 Software CCR Client Call Recorder for 2050 Software I have their 4102 Digital AuxBox for TDM sets and it works just fine.

Do Feature 9*8. if your configuration is default the documentation says User ID: Setnna (738662) password config 266344. hit the next softkey twice to get to IP Address select ok softkey. under the IP address selection Hit CHNG. then you should have multiple selections of IP ENL BACK under...

What is the status light doing (the led above the power)? What you are describing is the unit is booting up. Is the fan running full speed and then quiets down to a lower rpm? Can you ping the ethernet ports? Are any digital sets up and running?

Do you need CLID or OSI generation? If so then the ATA won't supply those features. The on board ports will and so will the GASM.

Based on the problem description "If I clip off and on a couple more times the port seems to reset, I receive dialtone" it sounds like the Dialogic card is not detecting the OSI (Open Switch Interval). The clipping on and off will appear to be an On Hook event that the analog port is looking...

Is there a Disconnect OSI detection parameter that can be set on the Dialogic boards via an API? Reading the datasheets for the ASM8+/GASM the OSI time period that is generated is a fixed value of 850 milliseconds.

Forgot to mention, when you are looking at the capabilities and preferences make sure the ATA DN is associated with a Pool or a line in the Prime Line setting..I think the setting defaults to I/C which is intercom. This might explain why you can only send faxes internally and not externally.

Have you checked to see if the ATA Setting for the ATA device is set for Telephon or Modem? If this is on a BCM50 go to Configuration in Element Manager and go to Telephone -> Sets -> Active Sets. Look up the DN that has the ATA, it should say Analog in the Model. Click on the DN and in the...

North America.

Additional data: went to the Nortel website http://www.nortel.com/products/01/eedge/bcm/collateral/nn111260.pdf under BCM50 Main unit 4 analog station ports [disconnect supervision - 850 Ms Momentary Disconnect, Message Waiting Indication - NA 120V 600 ms on and 1000 off, Calling Line...

We are currently using M50R2 with a Panasonic Wireless phone that has CLID...Works like a champ from what I can see. I think M50R1 had the same features but was restricted to North America. I would assume R3 would have the same features.

The BCM50 has 4 GASI (Global Analog Station Interfaces). These ports will pass CLID information just like the GASM8.

Agreed the ATA will not support VMWI. The GASI on the M50 will also support PBX VMWI. What you need to be aware of is there are 2 types of VMWI - PBX level which are approximately 90 V cadenced and CO levels that are 120 V cadenced. You need to check the specifications on the analog device...