BCM50 Analog Ports 1

[TWISTEDAPP]

Does the BCM50 have analog ports like the ASM+ whereby caller ID is passed through from the CO?

 

[NtrlUser]

The BCM50 has 4 GASI (Global Analog Station Interfaces). These ports will pass CLID information just like the GASM8.

 

[senk1s]

Nrtluser: have you tested in rel1 or 2 or 3?

 

[NtrlUser]

We are currently using M50R2 with a Panasonic Wireless phone that has CLID...Works like a champ from what I can see. I think M50R1 had the same features but was restricted to North America. I would assume R3 would have the same features.

 

[NtrlUser]

Additional data: went to the Nortel website

http://www.nortel.com/products/01/eedge/bcm/collateral/nn111260.pdf

under BCM50 Main unit
4 analog station ports [disconnect supervision - 850 Ms
Momentary Disconnect, Message Waiting Indication - NA 120V
600 ms on and 1000 off, Calling Line Identification (CLID) Name and Number] (keycode enabled)

 

[senk1s]

thanks ntrluser ... I knew GASM8+ supported but wasnt sure of the internal ports (didnt get a chance to test it)

Are u located in EMEA or APAC?

 

[NtrlUser]

North America.

 

[TWISTEDAPP]

Well I got the opportunity to validate the call display and it does work on both direct and transferred calls to the internal analog ports. I changed the DHCP server to off and now I can't get back into the switch and it shows an error 30100 on the main set? If I do a reset does that get me the default password back in or does it just clear the MSC card?