Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. ITBCMGUY

    Problem with BCM 200 3.6

    Nortel has a tool to fix the apache service. Contact your vendor and request the fix.
  2. ITBCMGUY

    BSR 222 VPN ISSUES

    I have them Nailed-UP. I also telneted into the router and disabled all the timers. I have just built the tunnels with the ips address instead of the 0.0.0.0 so now they have been stable. They just have to call me if the reboot the router or the lease times up. But so far no porblems...
  3. ITBCMGUY

    BSR 222 VPN ISSUES

    Hi all, I am at a lost here. I have 5 BSR 222 that I have installed with one being the Core router and the other connecting back via ABOT tunnels. The tunnels reset ever 15-45 mins. They were working for about a month or two and know no luck. Anybody out have there have some 222s working...
  4. ITBCMGUY

    BCM 50 tmwservice

    I performed the level 2 still no go. I replace the H/D with a known working one still no go. Performed a level 2 on the new known hard drive in the bad box. still no go. I have come to conclusing that the BIOS on the MB is bad. First time I ever had to change a whole box because I cant...
  5. ITBCMGUY

    BCM 50 tmwservice

    I can chage the time zone but not the time and date. The time does jump aroud though. There is no other services that are stopped that shouldnt be. I do not have and CLID lines or a PRI.
  6. ITBCMGUY

    BCM 50 tmwservice

    yes current patches. Its not losing time. The time service will not start therefore not allowing the time to be changed. I also tried NTP with no luck.
  7. ITBCMGUY

    BCM 50 tmwservice

    Hi there It is a BCM 50 rls 1. I cant change the date and time. The tmwservice will not start. I have valid gateway but still no luck. any other ides. Tim
  8. ITBCMGUY

    VOIP Trunk Issue between 2 Locations

    most likely you need to patch up the bcm. What version of bcm do you have? You can restart your feps service if you want to reset the trunks.
  9. ITBCMGUY

    Is i2050 V3 the only one works with Vista?

    I have V2 working on vista. no complaints. Maybe a pc issue.
  10. ITBCMGUY

    ip conference phone 2033 and Bcm 50 3.0

    you dont need the tftp address. Just put in the bcm address and port 7000 and let register.
  11. ITBCMGUY

    How many phones can a BCM 400 ring at the same time?

    I would open up the bcm monitor and see if the CPU is spiking.
  12. ITBCMGUY

    New Skillsets not showing up on the report

    I have the same problem. I am patched up with the latest SU patches.
  13. ITBCMGUY

    BCM 1000

    kgrant thanks for the response. Still no good. If i do a clean image and the press option 1 for a platform int. I will start the int. Then I get invalid bios contact support. Do you or somebody else have a 3.0 image disk set. Maybe I could load 3.0 then upgrade from there. Thanks for the...
  14. ITBCMGUY

    Dialing from Outlook

    all you need is the CTE license. Config is not to bad. No need for 3rd party software.
  15. ITBCMGUY

    BCM 1000

    anybody have some input on taking a BCM 1000 strait from 2.5 to 3.7?
  16. ITBCMGUY

    BCM 1000

    I am using a FRU nortel hard drive out of another boc. it is 20.4 gigs. I also upgraded the memory to 256. Its just the BIOS problem now.
  17. ITBCMGUY

    BCM 1000

    I just image to 3.7 but now when I try to intialize the hardrive I get invalid BIOS version. I went to intels site and see a update. Could I just load there update? Maybe try to VNC into the BCM and load locally or is there a easier way.
  18. ITBCMGUY

    BCM 1000

    ok.. Did a core upload on the MSC and I can now log in. But I cant launch voicemail. As always thanks for the help. tim
  19. ITBCMGUY

    BCM 1000

    Hey there I got into the BCM game at 3.6. I recently came accross a 1000 and cannot get into programming. I get to the user name and password but it says enterprise whatever not ready. I can telnet into the 1000 but it will not let me see the MSC card SYS ID or update the profile. The MSC...

Part and Inventory Search

Back
Top