Search results for query: *

bignose21, thanks for the reply. Yes there is a LSC entry for 82 with DEL 2...\ LSC 82 DEL 2 ...The weird thing is that nothing programming wise has been changed. Any other thoughts?...

Rls 3.0 61c (cs1000) We are having an intermitent problem with our H323 trunks. We have 6 sites setup with 6 digit dialing between using DSC and 4 dig ext at each site. In the past we had this issue and just reset the VGMC cards. We get DCH MSGI on the PBX that is having issue, but just...

We are getting this error today every 15 seconds. We have a 5.5 opt11 (now a CS1000E). We are getting occasional dropped calls. Here are a few of the errors. AUD093 00000001 00000232 00000227 0F18657E 00000001 00000000 AUD093 00000002 000000EC 00001450 0F0E44E8 00000001 00000000 AUD093...

^ Just thought I would see if anyone has any new light on this error. We are all patched up for CP and the CS1000E. Thanks for anyone's input. -Dan

Make sure that you are not archieving. Go to Message Management and scroll to the bottom. Uncheck "Enable system wide message archiving" if it is not a function you use. Then run a backup and see if it is smaller.

Are you launching AppBuilder from the web client or are you opening it manually? When exactly do you get this error? Thanks, Dan

(assuming CP 2.02 or newer) Log into CallPilot under "Messaging", select "Messaging Management". In the General section change the "Maximum prompt size" accordingly. Thanks, Dan

yyrkroon, How do you run a trace? I have tried adding an announcement with ringing and I get the same error. I apprecaite your insight.

On the server do start>run>cmd> then "ipgonfig /all" (no quotes). You should have two adapters listed one going to the ELAN (PBX) and the other going to the CLAN (customer network). The CLAN will be the IP for the web client. The URL should be http://123.12.12.123/cpmgr (insert your ip address...

I think you're stuck with those two options 1) Block incoming messages 2) Use AppBuilder :( I know I've wanted to do the same thing.

yyrkloon, Thanks for the reply. I know what you're say. Our users are saying that they get this problem when they just pick up the phone and call the application and select an option that sends them to a different number. I would like to think that they are just crazy, but I am having this...

doe13 Did you ever find that PEP. This error is driving me crazy. We are seeing it on multiple CallPilots. I was able to replicate this error. If I call another station on the PBX and then try to transfer the call to the SDN. It will fail right when the application tried to transfer out...

We have been having issues with call transfer through Appbuilder on one of our sites. Most of the time the call gets transferred fine, but we frequently get disconnected and the "Call Cannot be Transfered" message comes on. The ports are not maxed out, and we have more than enough...