s8720 not supported @ CM6 - so new server hardware a must.
As above - you must perform a staged upgrade to 4.0.5 or 5.2.1 first, and then upgrade to 6. You won't need provision, you can just backup the XLN file and restore
See the support site for more info
Doubt it is a bug
Are you using an IP set to make the call or digital?
Run a list trace when you make the call - what do you see? Any variation between good calls/bad calls?
Make other test calls to other destinations both internal/external - do you receive silence any where else?
ASA can remain in place - although System Manager provides a web-interface into CM (helpful centralised interface if you have Session Manager, CM etc)
Look on http://support.avaya.com under Avaya Aura System Manager - lots of information.
Will the remote LSP site IPs be changing?
You will need to look at your DHCP scopes for IP Handsets, and s8300 configuration (file synchronisation and registration addresses (CLANs at core or Processor Ethernet addresses) This is accessed through the maintenance web interface on the LSP
And as...
Hi
is anyone able to help with this please? ...sorry if its a silly question....
Is the 241 simultaneous calls per port network a tdm-tdm limit, or does it also apply to ip-tdm (my assumption is that maybe ip-tdm only needs 1 timeslot and 1 DSP resource?
Thanks
Hi
Simple one - For an IP-TDM call, eg an IP endpoint to a TDM trunk, or vice versa, how many TDM time slots will be used on the PN?
Are 2 timeslots required here, or just one?
Thanks
Hi all
Has anyone managed to get multiple AESs using a WebLM server on a customer provided windows server?
I can get this working and can allocate licenses using one of the AESs as the master WebLM, but if I rehost the license file to the windows 2003 server and try to use this I get "local...
Check in the routing and remote access - there is a setting in there where you assign which devide to use for RAS
I will try to log on to a MAS tomorrow and get the exact location
Nurofen - Did you completed the upgrade OK in the end?
I am upgrading 3.1 to 5.1 soon and have seen the same error
Ken, are these errors safe to ignore i.e if I clear any other errors apart from these two am I safe to proceed?
Thanks
Hi all
When I try to add a new email account I enter the hostname, mailbox number and password and then get
Access Denied. Use a telephone or the web client to access mailbox. The mail system's privacy settings prevent you from accessing your mailbox using MS-Outlook Client Add-in.
I've...
I've had that happen when there's been no VOIP Resource available
do a list trace station and then reboot the handset, see if you get any denials
read this guide it contains everything you should need to know
http://support.avaya.com/elmodocs2/comm_mgr/r5.0/245600_6.pdf
plug a butt onto the line that connects to the AUX and call in see if it rings, if you've powered off the system then a reset 1 will not do anything more for you
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.