TDM Timeslot - IP port to TDM Port 1

[definityandcmuk]

Hi

Simple one - For an IP-TDM call, eg an IP endpoint to a TDM trunk, or vice versa, how many TDM time slots will be used on the PN?

Are 2 timeslots required here, or just one?

Thanks

 

[definityandcmuk]

Hi

is anyone able to help with this please? ...sorry if its a silly question....

Is the 241 simultaneous calls per port network a tdm-tdm limit, or does it also apply to ip-tdm (my assumption is that maybe ip-tdm only needs 1 timeslot and 1 DSP resource?

Thanks

 

[AvayaTier3]

TDM bus calls for each PN require a listen and a talk time-slot for each connection on the call. Medpro converts to IP and uses DSP resources based on the type codec(s) used for the IP endpoints.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[definityandcmuk]

Thanks

So for music/announcement - only 1 would be required (i.e listen only?)

 

[AvayaTier3]

announcements and music, depending on load and location in PNs will add calls to the same listen time-slot.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[definityandcmuk]

Thanks