Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. gigoihor

    Callpilot 100 Capacitor C221

    It is orange/yellow in colour Plus (+) bar above 336 16K 148 Surface mount if not sure go to a electronics parts dealer
  2. gigoihor

    System turning off lines and we have no idea what to do

    What type of equipment are you using give more detail. Admin. code does nothing to line types or changes in lines or set abilities. It is in the config. side you should be looking at. Did you loose power?????
  3. gigoihor

    NAM with 4.1 s/w

    Thank you for your replies. I did try it on a R1T1 some basics worked, but no all. Again thank you.
  4. gigoihor

    NAM with 4.1 s/w

    Does anybody know what is the lowest software level that a MICS can have to operate with a NAM 4.1 s/w properly.
  5. gigoihor

    Capacitor type in StarTalk Flash 4?

    What you are questioning as a cap. is really a "super cap"., It act's like a battery, by way of its slow drain of current to keep the software up. Once you shut down current (120v) all is defaulted. It is field changable if you have the tools and parts. Just a last note All of Meridian...
  6. gigoihor

    CCR Tree wont pick up!

    Make sure you have created home menu on path 0 and complete the tree. Bob
  7. gigoihor

    Minuet software version

    Care of Canadianwolf, if you send me your email address I will send you a copy of Minuet ACD v1.10.0008 Bob gigo@sympatico.ca
  8. gigoihor

    HOW TO have2 MICS 6.1 tied together 170 sets

    6 ports per slot, two slots equals 12 at 16 stns gives you 192 KSU 32 gives 228. That's one 0X32.
  9. gigoihor

    Lines won't disconnect - need step by step help

    DS is a programme function in the Config, Trunk, you can set it on/off and the milliseconds. You need DSDR5 for full function. The only way I was able to disconnect, was a shut down. Disconnect of CO lines took to long.
  10. gigoihor

    Startalk Voicemail S/W 2.0.3 Hard Drive

    Do you get log with the AA asking you to enter it. If not the HD is defective.
  11. gigoihor

    Is it possible....

    You can make it act any way you want. But it is the way you act that it will work for you.
  12. gigoihor

    Applications Module "POST"

    Thank's Brian, We did the video earlier, but didn't realize the dip switches. Finding anything about this SBC from IBM is non existing. We took your advice and it worked. We also found that when you boot up the red LED numbers also appear on the top right corner. Two things how can we get a...
  13. gigoihor

    Applications Module "POST"

    Thank's, but this unit does not have a video port on it?? Will try a dumb terminal. Bob
  14. gigoihor

    Applications Module "POST"

    Thanks to all will research further Bob
  15. gigoihor

    Applications Module "POST"

    Does anyone know the Red Led codes for the NVM SBC. Cannot find it at IBM site. Thank's Bob
  16. gigoihor

    caller id on a pri

    Make sure you give the DN call log, but leave it at LOG 0. Name or number, your/customer decision.

Part and Inventory Search

Back
Top