Hello All!!
I have a Nortel 1120e Voip phone running off a CS2100...
The soft keys are programmed with transfer and conference which seem to disappear when you go off hook to answer a call.
Then after 6 seconds they RE-APPEAR which is making the end users crazy.
A side note is that the 1140E...
Good morning All!!
I have a Nortel 1120e voip phone running off a CS2100...
The soft keys are programmed with transfer and conference which seem to disappear when you go off hook to answer a call.
Then after 6 seconds they REAPPEAR which is making the end users crazy.
A side note is that the...
Nope, this switch has been bastardized in many ways..
We use 1 to dial out.
We have ranges using every digit 2-9.
I just want to use 93XX for internal numbers that eventual will live in Call Manager.
SO can this be done?
I see that 93 is used for the paging system..
Can 9300-9399 still be used or will this be conflicting?
I have to mention that we have Nortel and Cisco CCM working together.. So we built a Qsig trunk which we add CDP DSC FLEN 4 and RLI 19 so that any DNs not found in the PBX goes over the Qsig...
Hello All-
I want to use the 9300-9399 range for NON DIDs in the switch...
93XX does not show up as LUDN in LD 20.
So how do I ADD 93XX into the switch to make this an available range?
Please Help.
Thanks in advance!
ST~~~
Hi All-
Is there a way to print a range of TN's that shows the TN and whats on key 0 in a SHORT FORM??
I want to do it uby PRT, TNB 196 0 xx xx ..........
I see I can do this in LD 11 by doing a range of DNs (DN 22XX).
ie:
DN 2244
CPND
NAME John Doe
XPLN 23...
Yes she has it stored as 1+1+212+xxx-xxxx so she can selct an dial it..
She insisted at another location with the same I2004, she was able to dial from the P/Directory and when the person called in.... the name would appear as it was stored.
ie: "Marys Cell" + the phone number.
I programmed...
Good Mornin All!
I have a user that insists that at one time she was able to save names & numbers in the Personal Directory on the I2004 phone and the callers name would appear with the phone number on her screen when that caller dialed in.
And there is no problem DIALIing the name from the...
All-
I know I can generate a list of sets in inventory...
However, I want to know how many of those phones are physically plugged in.
What load & how can I STAT this??
Thanks in advance.
ST~~~
Hi All-
I have Procomm 4.X connected a Opt 61C.
When I launch the program it has something showing on the bottom left corner..Saying " Performing 'dedicated print mode' press ESC to abort." I press ESC and the app just shuts down.
There is no data on the screen.
Is there an Can anyone help...
Yes it was an easy change...
Before I OUT it.. this is what appears when I PRT the DN.
=======================================
>ld 20
PT0000
REQ: prt
TYPE: dn
TYPE DNB
CUST 0
DN 3480
DATE
PAGE
DES
NO ACT SINCE NO DATE
NACT
BUG302 TNTRANS was called with an illegal value...
Hi All-
I am trying to put an extension on key 00 on a IP phone.
TN is 64 0 06 05...
This message comes up.
"BUG302 TNTRANS was called with an illegal value, TN 2356003"
What LD and command will fix this error??
Your help is much appreciated.
Thanks
ST~~~
Hi All-
A user sees a call coming in on his caller ID..
He has a Nortel IP2004 phone...
So is there a feature button to program to auto ignore or dump the call staright to voicemail?
Like on a cell phone....
If so, whats the LD and programming to be added?
Thanks
ST~~~
Hi All-
I have 2 users with 2 seperate numbers:
ie: 5555 & 5566
I want both to appear on another phone so either line will ring...
Can I put 2 seperate DNs on one 7940 phone?
Line 1: 5555
Line 2: 5566
Please help
Thanks
SN~~~~~~~~
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.