Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. dazzer01

    2 H.Drives,1 Partition?

    Hi guys Thanx for the help FaiTHLeSS: what do you mean by RAID, The harddrive interface or is it a piece of software? BooYaKaSha: I'll give that a go, I have never used that function before, but who dares wins!! Again Thanx...D Wisdom before knowledge!
  2. dazzer01

    2 H.Drives,1 Partition?

    Hi everybody, A friend of mine has a 1800xp/512ram/Gforce4/ WinXPpro. He has 2 Drives installed; The master is 20g 5200rpm, Formatted Fat32,needless to say he is running out of space, and wants to make simple use of the second H'Drive; It is also a 20g 5200rpm,formatted Fat32, without a jot of...
  3. dazzer01

    Please help LOCKUP PROBLEM

    Hi Badboy, Did these new crashes happen straight after disabling the non essential services? if so re-check dependencies and turn back on any suspect services.I say this because you reported some stability after dissing some of them, so try to rewind to that point, then dis services one at a...
  4. dazzer01

    Right Click on Desktop Icons Freezes XP

    Hi nosremark, Try this ..if you haven't already- go to your desktop folder using explorer and try using the shortcuts in there... any joy? if so your problem is very complicated and will require much thought by all users! If they don't work from there delete them and make new ones back in your...
  5. dazzer01

    Please help LOCKUP PROBLEM

    Hi Badboy, xomcat is right about a good clean-up and defrag. Sorry to confuse you DLTC is distributed link tracking client and WMI is windows managemant instrumentation... I will stop there.. I think what you need to do after you have done a good clean up is visit www.blackviper.com download...
  6. dazzer01

    Please help LOCKUP PROBLEM

    Hi Bad boy, Your sandra report is not too bad, you should as sdvised by xomcat disable one of the sound devices, you should attempt to activate s.m.a.r.t. in your bios if available, turn off the listed services except for DLTC and WMI, most of the other warnings are not crucial except one...
  7. dazzer01

    Please help LOCKUP PROBLEM

    Hi Badboy, Good advise from these guys. Also get a sisoft sandra prog and run its 'performance tune-up wizard' this may spot the prob for you very quickly! Good luck D
  8. dazzer01

    Right Click on Desktop Icons Freezes XP

    Hi Nosremark, That is very strange!.. One idea though, you should check out your 'send to' folder, there could be a problem there to do with the content of the folder, too many sources to list!? Check that all the needed services are active, as this prob could be to do with the 'explorer...
  9. dazzer01

    Right Click on Desktop Icons Freezes XP

    Hi Nosremark, That is very strange!.. One idea though, you should check out your 'send to' folder, there could be a problem there to do with the content of the folder, too many sources to list!? Check that all the needed services are active, as this prob could be to do with the 'explorer...
  10. dazzer01

    MTU on dial up modem

    Hi clownshoes, DavidDCSA is dead right on this, try www.majorgeeks.com I think they have a free prog called 'tweek TCP' or something like that, it has a changeable MTU setting as well as a pinger prog to detect your maximum MTU so that you can set it to it's optimum! Good luck. dazzer01
  11. dazzer01

    Aol 8.0 crashes XP pro

    Hi shadow' I think the best course of action is to go to the Sygate web-site, here you should find a f.a.q. or forum that might point to any problems running your firewall with aol8. If Sygate is on top of any problems it should post a patch to download and update your f'wall software. i...
  12. dazzer01

    Aol 8.0 crashes XP pro

    Cheers Banzai, I have done that, on several occasions before. I simply found on the last install i could not stop the crashing problem (stated above) from re-occuring. The only solution that worked was the patch from PCcillin. It seems that aol8 is a bit tetchy with firewalls. I have not had...
  13. dazzer01

    Aol 8.0 crashes XP pro

    Hi jnelson74. I may have the answer for you, I am using pcCillin firewall and when xp crashed I got the blue screen pointing me to 'atwpkt2.sys' and 'pcc_pfw' I struggled to see what the cause was until I read about AOL/using firewalls. It has advice about config of most popular firewalls...
  14. dazzer01

    Slow Response

    Cheers bcastner, you've got it!
  15. dazzer01

    The system administrator has set policies to prevent this installation

    Hi Ricehead, These kind of uninstall probs seem fairly difficult to solve. You will have to do some of the following: You are basically looking for Norton files on your pc. left over from the previous install, try Reg cleaner4.3 use the extended uninstall menu..or try scouring...
  16. dazzer01

    Slow Response

    Hi gwzulu, Just a thought. It could be the Hibernation function, I haven't had this problem myself, but it sounds a likely cause. Check out the help files on this function, and dissable it... Hope this helps!
  17. dazzer01

    Internal Modem Us Robotics 3098-OEM and Windows XP

    Ok CMir, The only other thing I can think of, is the downloaded driver is corrupt, perhaps try another source, put in a search for modem drivers, i'm sure i've seen a good site someware! let me know if you have any joy and good luck.
  18. dazzer01

    Internal Modem Us Robotics 3098-OEM and Windows XP

    Hi CMir, this may sound a little silly, but if you still have your problem, try this.. using start/ run/ browse, browse your install cd, look for exactly the correct driver for your xp and modem combination, copy this driver to a new folder on your desktop ( doing this ensures access to the...
  19. dazzer01

    Win XP Pro forgot my printer

    About your q,mark usb controller. This points toward your m'board drivers, if you have the disk, re run the install, it should search for installed components and let you re-install only for the usb. OR.. you have altered your bios settings, and perhaps turned off usb support/ usb...
  20. dazzer01

    Win XP Pro forgot my printer

    If you are running 98, then run Sfc from the start menu, and use the replace option, to install the fresh .dll ..any help?

Part and Inventory Search

Back
Top